Operators Manual
Table Of Contents
- SYMBOL EXPLANATION
- CONTENTS
- WHAT IS WHAT?
- GENERAL SAFETY PRECAUTIONS
- ASSEMBLY
- FUEL HANDLING
- STARTING AND STOPPING
- WORKING TECHNIQUES
- MAINTENANCE
- TECHNICAL DATA
- DECLARATION OF CONFORMITY relating to 2000/14/EC
- DECLARATION OF CONFORMITY relating to 98/37/EC
- Trimmer Head Line Loading Instructions
- Plastic Blades (Tri Cut)
12
ASSEMBLY
Fitting the trimmer guard and
trimmer head
S Fit the correct trimmer guard (A) for use
with the trimmer head. Hook the trimmer
guard/combination guard onto the fitting
on the shaft and secure with the bolt (D).
S Fit the drive disc (B) on the output shaft.
S Turn the shaft until one of the holes in the
drive disc aligns with the corresponding
hole in the gear housing.
S Insert hex wrench (C) in the hole to lock
the shaft.
S Screw on the trimmer head (H) in the op-
posite direction to the direction of rota-
tion.
S To dismantle, follow the instructions in
the reverse order .
H
D
A
A
B
C