Operators Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear Customer,
- Before using a new chain saw
- Important
- Always use common sense (2)
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle trigger lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fueling
- Fuel safety
- Starting and stopping
- Before use: (50)
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Starter housing
- Air filter
- Spark plug
- Needle bearing lubrication
- Cooling system
- ”Air Injection” centrifugal cleaning
- Winter use
- Troubleshooting schedule
- Maintenance schedule
- Technical data
- Guide bar and saw chain combinations
- Saw chain filing and file gauges
- EC Declaration of Conformity
SADRÎAJ
Croatian – 199
1158605-39 Rev.3 2016-09-20
SadrÏaj
OBJA·NJENJE ZNAKOVA
Znakovi na stroju: ....................................................... 198
Znakovi u priruãniku: .................................................. 198
SADRÎAJ
SadrÏaj ....................................................................... 199
UVOD
Po‰tovani kupãe! ......................................................... 200
·TO JE ·TO?
·to je ‰to na motornoj pili? ......................................... 200
OPåENITA PRAVILA ZA SIGURNOST NA RADU
Mjere prije kori‰tenja nove motorne pile ..................... 201
VaÏno ......................................................................... 202
Zdrav razum treba prevladati ..................................... 202
Osobna za‰titna oprema ............................................. 202
Sigurnosna oprema stroja ........................................... 202
Oprema za rezanje ..................................................... 204
SASTAVLJANJE
Sastavljanje maãa i lanca ........................................... 208
RUKOVANJE GORIVOM
Gorivo ......................................................................... 209
Punjenje goriva ........................................................... 210
Sigurnost pri rukovanju s gorivom ............................... 210
UKLJUâIVANJE I ISKLJUâIVANJE
Ukljuãivanje i iskljuãivanje ........................................... 211
PRINCIP RADA
Prije svake upotrebe: ................................................... 212
Opçenite upute za rad ................................................ 212
Kako da izbjegnete trzaj ............................................. 215
ODRÎAVANJE
Opçenito ..................................................................... 216
Pode‰avanje rasplinjaãa .............................................. 216
Provjera, odrÏavanje i servisiranje siguronosne opreme
motorne pile
............................................................... 216
Prigu‰ivaã ................................................................... 217
Naprava za paljenje
.................................................... 217
Filter za zrak ............................................................... 218
Svjeçica ...................................................................... 218
OdrÏavanje leÏi‰ta za iglu ........................................... 218
Rashladni sistem ......................................................... 218
Centrifugalno ãi‰çenje
"Air Injection" ......................... 219
Upotreba po zimi ........................................................ 219
Plan za pronalaÏenje kvara .......................................... 220
Raspored odrÏavanja ................................................... 221
TEHNIâKI PODACI
Tehniãki podaci ........................................................... 222
Kombinacije lanca i maãa ........................................... 223
Bru‰enje lanca i mjeraãi dubine utora ......................... 223
EC-uvjerenje o podudaranju ....................................... 223