Operators Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear Customer,
- Before using a new chain saw
- Important
- Always use common sense (2)
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle trigger lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fueling
- Fuel safety
- Starting and stopping
- Before use: (50)
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Starter housing
- Air filter
- Spark plug
- Needle bearing lubrication
- Cooling system
- ”Air Injection” centrifugal cleaning
- Winter use
- Troubleshooting schedule
- Maintenance schedule
- Technical data
- Guide bar and saw chain combinations
- Saw chain filing and file gauges
- EC Declaration of Conformity
CUPRINS
Romanian
–
329
1158605-39
Re
v
.3 2016-09-20
Conöinut
EXPLICAÖIA SIMBOLURILOR
Simboluri pe maäinã:
...................................................... 328
Simboluri în instrucöiunile de utilizare: .......................... 328
CUPRINS
Conöinut
........................................................................ 329
INTRODUCERE
Stimate client!
................................................................ 330
PÂRÖILE COMPONENTE
Pãröile componente ale ferãstrãului cu motor
................. 330
MÂSURI GENERALE DE PROTECÖIA MUNCII
Mãsuri luate înaintea folosirii unui ferãstrãu cu motor nou
331
Important
...................................................................... 332
Procedaöi permanent conform raöionamentului de bun
simö ................................................................................ 332
Echipament personal de protecöia muncii ....................... 332
Echipamentul de siguranöã al maäinii ............................. 332
Mecanismul de tãiere ..................................................... 334
MONTAJ
Montarea lamei de ghidaj äi a lanöului
............................ 339
MANIPULAREA COMBUSTIBILULUI
Amestecul de combustibil
............................................... 340
Alimentarea .................................................................... 341
Siguranöa manipulãrii combustibilului ........................... 341
PORNIRE ÄI OPRIRE
Pornire äi oprire
............................................................. 342
REGULI DE LUCRU
Înaintea fiecãrei folosiri:
................................................. 344
Instrucöiuni generale de lucru ......................................... 344
Mãsuri de prevenire a reculului ...................................... 347
ÎNTREÖINERE
Generalitãöi
.................................................................... 348
Reglarea carburatorului .................................................. 348
Verificarea, întreöinerea, äi serviciul echipamentului de
siguranöã al ferãstrãului cu motor
................................... 348
Toba de eäapament ........................................................ 349
Demarorul ..................................................................... 349
Filtrul de aer .................................................................. 350
Bujia .............................................................................. 350
Ungerea rulmentului cu ace ........................................... 350
Sistemul de rãcire ........................................................... 351
Curãöirea centrifugalã a aerului ”Air Injection” .............. 351
Folosirea în timpul iernii ................................................ 351
Programul de depanare ................................................... 352
Planificarea întreöinerii ................................................... 353
DATE TEHNICE
Date tehnice
................................................................... 354
Combinaöii de lame de ghidaj äi lanöuri ..........................
355
Ascuöirea lanöului äi matriöele ......................................... 355
Declaratie de conformitate EC ....................................... 355