Operators Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear Customer,
- Before using a new chain saw
- Important
- Always use common sense (2)
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle trigger lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fueling
- Fuel safety
- Starting and stopping
- Before use: (50)
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Starter housing
- Air filter
- Spark plug
- Needle bearing lubrication
- Cooling system
- ”Air Injection” centrifugal cleaning
- Winter use
- Troubleshooting schedule
- Maintenance schedule
- Technical data
- Guide bar and saw chain combinations
- Saw chain filing and file gauges
- EC Declaration of Conformity
English – 33
TECHNICAL DATA
1158605-39 Rev.3 2016-09-20
Guide bar and saw chain combinations
The following cutting attachments are type approved for the models Husqvarna 135, 135e and 135e TrioBrake.
Saw chain filing and file gauges
EC Declaration of Conformity
(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service
Husqvarna 135, 135e and 135e TrioBrake from 2016’s serial numbers and onwards (the year
is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements
of the COUNCIL’S DIRECTIVES:
- of May 17, 2006 ”relating to machinery”
2006/42/EC.
- of February 26, 2014 ”relating to electromagnetic compatibility”
2014/30/EU.
- of May 8, 2000 ”relating to the noise emissions in the environment”
2000/14/EC.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN ISO 12100:2010, CISPR12:2007, ISO 14982:2009, EN ISO 11681-1:2011.
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive’s (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex IX, have the numbers:
0404/11/2306 - 135, 135e, 135e TrioBrake.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity with
anne
x V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. The
certificates have the numbers:
01/161/107-135, 135e, 135e TrioBrake
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna March 30, 2016
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
Guide bar Saw chain
Length, inch Pitch, inch Gauge, mm Max. nose radius Type
Length, drive links
(no.)
14
3/8 1,3 9T
Husqvarna H37,
Husqvarna H36
52
16 56