Operators Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear Customer,
- Before using a new chainsaw
- Important
- Always use common sense (2)
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle trigger lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fueling
- Fuel safety
- Starting and stopping
- Before use: (50)
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Checking, maintaining and servicing chainsaw safety equipment
- Muffler
- Starter housing
- Air filter
- Spark plug
- Needle bearing lubrication
- Cooling system
- ”Air Injection” centrifugal cleaning
- Winter use
- Troubleshooting schedule
- Maintenance schedule
- Technical data
- Guide bar and saw chain combinations
- Saw chain filing and file gauges
- EC Declaration of Conformity
32 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/
EC.
Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound
pressure level is a standard deviation of 1 dB (A).
Note 3: Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions. Reported data for equivalent vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
2
.
135 135e
Engine
Cylinder displacement, cm
3
40,9 40,9
Cylinder bore, mm 41 41
Stroke, mm 31 31
Idle speed, rpm 2900 2900
Power, kW/ rpm 1,5/9000 1,5/9000
Ignition system
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y/
Husqvarna HQT-1
NGK BPMR 7A/
Champion RCJ 7Y/
Husqvarna HQT-1
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Fuel tank capacity, litre 0,37 0,37
Oil pump capacity at 9,000 rpm, ml/min 13 13
Oil tank capacity, litre 0,25 0,25
Type of oil pump Automatic Automatic
Weight
Chainsaw without bar, chain and with empty tanks, kg 4,4 4.6
Noise emissions (see note 1)
Sound power level, measured dB(A) 113 113
Sound power level, guaranteed L
WA
dB(A) 114 114
Sound levels (see note 2)
Equivalent sound pressure level at the operator’s ear, dB(A) 102 102
Equivalent vibration levels, a
hveq
(see note 3)
Front handle, m/s
2
3,9 3,9
Rear handle, m/s
2
3.8 3.8
Chain/bar
Standard bar length, inch/cm 14/35 14/35
Recommended bar lengths, inch/cm 14-16 / 35-40 14-16 / 35-40
Usable cutting length, inch/cm 13-15 / 33-38 13-15 / 33-38
Pitch, mm 3/8 / 9,52 3/8 / 9,52
Thickness of drive links, inch/mm 0,050/1,3 0,050/1,3
Type of drive sprocket/number of teeth Spur/6 Spur/6
Maximum chain speed, m/sec 22,9 22,9