Instruction Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Maintenance schedule
- Daily maintenance
- Weekly maintenance
- Monthly maintenance
- Yearly maintenance
- Intermittent maintenance
- To adjust the idle speed
- To do maintenance on the spark arrester mesh
- To do maintenance on the spark plug
- To clean the air filter
- To sharpen the saw chain
- To lubricate the cutting equipment
- Transportation
- Storage
- Technical Data
- Accessories
- Declaration of Conformity
- Съдържание
- Въведение
- Безопасност
- Монтиране
- Експлоатация
- Поддръжка
- График за техническо обслужване
- Всекидневно обслужване
- Седмично техническо обслужване
- Месечно техническо обслужване
- Ежегодно обслужване
- Периодично обслужване
- Регулиране на оборотите на празния ход
- За техническо обслужване на искрогасителната мрежа
- Техническо обслужване на запалителната свещ
- Почистване на въздушния филтър
- Заточване на веригата за моторен трион
- Смазване на режещото оборудване
- Транспортиране
- Съхранение
- Технически характеристики
- Принадлежности
- Декларация за съответствие
- Sadržaj
- Uvod
- Sigurnost
- Sastavljanje
- Rukovanje
- Održavanje
- Plan održavanja
- Svakodnevno održavanje
- Sedmično održavanje
- Mjesečno održavanje
- Godišnje održavanje
- Povremeno održavanje
- Da biste podesili brzinu u praznom hodu
- Održavanje mrežice za odvođenje iskri
- Da biste obavili radove održavanja na svjećici
- Čišćenje zračnog filtera
- Da biste naoštrili lanac pile
- Da biste podmazali opremu za rezanje
- Transport
- Skladištenje
- Tehnički podaci
- Pribor
- Izjava o usaglašenosti
- Obsah
- Úvod
- Bezpečnost
- Montáž
- Provoz
- Údržba
- Přeprava
- Skladování
- Technické údaje
- Příslušenství
- Prohlášení o shodě
- Indhold
- Indledning
- Sikkerhed
- Montering
- Drift
- Vedligeholdelse
- Vedligeholdelsesskema
- Dagligt eftersyn
- Ugentligt eftersyn
- Månedligt eftersyn
- Årlig vedligeholdelse
- Periodisk vedligeholdelse
- Sådan justerer du tomgangshastigheden
- Sådan foretager du vedligeholdelse på gnistfangernettet.
- Sådan foretager du vedligeholdelse på tændrøret
- Rengøring af luftfilteret
- Sådan skærpes savkæden
- Sådan smøres skæreudstyret
- Transport
- Opbevaring
- Tekniske data
- Tilbehør
- Overensstemmelseserklæring
- Inhalt
- Einleitung
- Sicherheit
- Montage
- Betrieb
- So verwenden Sie den Kraftstoff
- Vor dem Starten des Motors
- So starten Sie bei kaltem Motor
- So starten Sie einen warmen Motor
- So starten Sie den Motor, wenn der Kraftstoff zu heiß ist
- So stoppen Sie das Gerät
- So verwenden Sie eine Rindenstütze
- So fällen Sie einen Baum
- So entasten Sie einen Baum
- So zersägen Sie einen Baumstamm
- Wartung
- Transport
- Lagerung
- Technische Daten
- Zubehör
- Konformitätserklärung
- Περιεχόμενα
- Εισαγωγή
- Ασφάλεια
- Συναρμολόγηση
- Λειτουργία
- Συντήρηση
- Πρόγραμμα συντήρησης
- Καθημερινή συντήρηση
- Εβδομαδιαία συντήρηση
- Μηνιαία συντήρηση
- Ετήσια συντήρηση
- Διακεκομμένη συντήρηση
- Για να ρυθμίσετε τις στροφές ανά λεπτό ρελαντί
- Εκτέλεση εργασιών συντήρησης στη σίτα συγκράτησης των σπινθήρων
- Εκτέλεση εργασιών συντήρησης στο μπουζί
- Καθαρισμός του φίλτρου αέρα
- Ακόνισμα αλυσίδας πριονιού
- Λίπανση του εξοπλισμού κοπής
- Μεταφορά
- Αποθήκευση
- Τεχνικά στοιχεία
- Αξεσουάρ
- Δήλωση Συμμόρφωσης
- Contenido
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Programa de mantenimiento
- Mantenimiento diario
- Mantenimiento semanal
- Mantenimiento mensual
- Mantenimiento anual
- Mantenimiento intermitente
- Para ajustar el régimen de ralentí
- Para realizar el mantenimiento de la red apagachispas
- Para realizar el mantenimiento de la bujía
- Para limpiar el filtro de aire
- Para afilar la cadena de sierra
- Para lubricar el equipo de corte
- Transporte
- Almacenamiento
- Datos técnicos
- Accesorios
- Declaración de conformidad
- Contenido
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Programa de mantenimiento
- Mantenimiento diario
- Mantenimiento semanal
- Mantenimiento mensual
- Mantenimiento anual
- Mantenimiento intermitente
- Para ajustar el régimen de ralentí
- Para realizar tareas de mantenimiento en la red apagachispas
- Para realizar tareas de mantenimiento en la bujía
- Para limpiar el filtro de aire
- Para afilar la cadena de sierra
- Para lubricar el equipo de corte
- Transporte
- Almacenamiento
- Datos técnicos
- Accesorios
- Declaración de conformidad
- Sisukord
- Sissejuhatus
- Ohutus
- Kokkupanek
- Töö
- Hooldamine
- Transportimine
- Hoiustamine
- Tehnilised andmed
- Lisavarustus
- Vastavusdeklaratsioon
- Sisällys
- Johdanto
- Turvallisuus
- Asentaminen
- Käyttö
- Huolto
- Kuljettaminen
- Säilytys
- Tekniset tiedot
- Tarvikkeet
- Vaatimustenmukaisuusvakuutus
- Sommaire
- Introduction
- Sécurité
- Montage
- Utilisation
- Entretien
- Schéma d'entretien
- Entretien quotidien
- Entretien hebdomadaire
- Entretien mensuel
- Maintenance annuelle
- Entretien périodique
- Pour régler le régime de ralenti
- Pour effectuer l'entretien de la grille pare-étincelles
- Pour effectuer l’entretien de la bougie d’allumage
- Pour nettoyer le filtre à air
- Pour affûter la chaîne de sciage
- Pour lubrifier l’équipement de coupe
- Transport
- Remisage
- Caractéristiques techniques
- Accessoires
- Déclaration de conformité
- Sadržaj
- Uvod
- Sigurnost
- Sastavljanje
- Rad
- Održavanje
- Prijevoz
- Skladištenje
- Tehnički podaci
- Dodaci
- Izjava o sukladnosti
- TARTALOMJEGYZÉK
- Bevezető
- Biztonság
- Összeszerelés
- Üzemeltetés
- Karbantartás
- Szállítás
- Tárolás
- Műszaki adatok
- Tartozékok
- Megfelelőségi nyilatkozat
- Sommario
- Introduzione
- Sicurezza
- Definizioni di sicurezza
- Istruzioni di sicurezza generali
- Istruzioni di sicurezza per l’utilizzo
- Istruzioni di sicurezza per la manutenzione
- Montaggio
- Utilizzo
- Manutenzione
- Programma di manutenzione
- Manutenzione giornaliera
- Manutenzione settimanale
- Manutenzione mensile
- Manutenzione annuale
- Manutenzione occasionale
- Per regolare il regime minimo
- Per gli interventi di manutenzione della rete parascintille
- Per gli interventi di manutenzione della candela
- Per pulire il filtro dell'aria
- Per affilare la catena
- Per lubrificare l'attrezzatura di taglio
- Trasporto
- Rimessaggio
- Dati tecnici
- Accessori
- Dichiarazione di conformità
- 目次
- はじめに
- 安全性
- 組立
- 操作
- メンテナンス
- 搬送
- 保管
- 主要諸元
- アクセサリー
- 適合宣言
- TURINYS
- Įvadas
- Sauga
- Surinkimas
- Naudojimas
- Techninės priežiūros darbas
- Priežiūros grafikas
- Kasdienė techninė priežiūra
- Savaitinė techninė priežiūra
- Mėnesinė techninė priežiūra
- Kasmetinė techninė priežiūra
- Protarpiais atliekama techninė priežiūra
- Greičio tuščiąja eiga reguliavimas
- Kibirkščių sulaikymo tinklelio priežiūra
- Uždegimo žvakės priežiūra
- Kaip išvalyti oro filtrą
- Pjūklo grandinės galandimas
- Pjovimo įrangos tepimas
- Transportavimas
- Laikymas
- Techniniai duomenys
- Priedai
- Atitikties deklaracija
- Saturs
- Ievads
- Drošība
- Montāža
- Lietošana
- Apkope
- Transportēšana
- Glabāšana
- Tehniskie dati
- Piederumi
- Atbilstības deklarācija
- Inhoud
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Transport
- Opslag
- Technische gegevens
- Accessoires
- Verklaring van overeenstemming
- INNHOLD
- Innledning
- Sikkerhet
- Montering
- Bruk
- Vedlikehold
- Transport
- Oppbevaring
- Tekniske data
- Tilbehør
- Samsvarserklæring
- SPIS TREŚCI
- Wstęp
- Bezpieczeństwo
- Montaż
- Obsługa
- Przegląd
- Transport
- Przechowywanie
- Dane techniczne
- Akcesoria
- Deklaracja zgodności
- ÍNDICE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Esquema de manutenção
- Controle diário
- Controle semanal
- Manutenção mensal
- Manutenção anual
- Manutenção intermitente
- Ajustar o ralenti
- Realizar tarefas de manutenção na rede retentora de faíscas
- Para efetuar a manutenção da vela de ignição
- Para limpar o filtro de ar
- Para afiar a corrente da serra
- Para lubrificar o equipamento de corte
- Transporte
- Armazenamento
- Especificações técnicas
- Acessórios
- Declaração de conformidade
- Conteúdo
- Introdução
- Segurança
- Montagem
- OPERAÇÃO
- Para usar o combustível
- Antes de dar partida no motor
- Para dar partida a frio em um motor
- Para dar partida a quente em um motor
- Para dar partida no motor quando o combustível estiver muito quente
- Para interromper o funcionamento
- Usar a ponta de batente
- Para derrubar uma árvore
- Para cortar um galho de uma árvore
- Para cortar um tronco
- Manutenção
- Cronograma de manutenção
- Manutenção diária
- Manutenção semanal
- Manutenção mensal
- Manutenção anual
- Manutenção Intermitente
- Para ajustar a marcha lenta
- To do maintenance on the spark arrester mesh
- Para fazer manutenção na vela de ignição
- Para limpar o filtro de ar
- Para afiar a corrente da serra
- Para lubrificar o equipamento de corte
- Transporte
- Armazenagem
- Dados técnicos
- Acessórios
- Declaração de Conformidade
- CUPRINS
- Introducere
- Siguranţă
- Definiţii privind siguranţa
- Instrucțiuni generale de siguranță
- Instrucțiuni de siguranță pentru utilizare
- Instrucțiuni de siguranță pentru întreținere
- Asamblarea
- Funcționarea
- Pentru utilizarea carburantului
- Înainte de pornirea motorului
- Pentru pornirea unui motor rece
- Pentru pornirea unui motor cald
- Pentru a porni motorul când carburantul este prea fierbinte
- Pentru oprire
- Utilizarea unei bare de protecție
- Pentru a doborî un copac
- Tăierea ramurilor unui arbore
- Ferăstruirea unui buștean
- Întreținerea
- Program de întreţinere
- Întreținerea zilnică
- Întreținerea săptămânală
- Întreținerea lunară
- Întreținerea anuală
- Întreţinere intermitentă
- Pentru reglarea turaţiei de mers în gol
- Pentru a efectua operații de întreținere la sita parascântei
- Pentru a efectua operații de întreținere a bujiei
- Pentru a curăța filtrul de aer
- Pentru ascuţirea lanţului de ferăstrău
- Pentru a unge echipamentul de tăiere
- Transportul
- Depozitarea
- Date tehnice
- Accesorii
- Declarație de conformitate
- Содержание
- Введение
- Безопасность
- Сборка
- Эксплуатация
- Техническое обслуживание
- График технического обслуживания
- Ежедневное обслуживание
- Еженедельное обслуживание
- Ежемесячное обслуживание
- Ежегодное обслуживание
- Периодическое обслуживание
- Регулировка скорости холостого хода
- Техобслуживание искрогасительной сетки
- Техобслуживание свечи зажигания
- Очистка воздушного фильтра
- Заточка цепи пилы
- Смазка режущего оборудования
- Транспортировка
- Хранение
- Технические данные
- Принадлежности
- Декларация о соответствии
- Obsah
- Úvod
- Bezpečnosť
- Montáž
- Prevádzka
- Údržba
- Preprava
- Skladovanie
- Technické údaje
- Príslušenstvo
- Vyhlásenie o zhode
- VSEBINA
- Uvod
- Varnost
- Montaža
- Delovanje
- Vzdrževanje
- Prevoz
- Shranjevanje
- Tehnični podatki
- Dodatna oprema
- Izjava o skladnosti
- Sadržaj
- Uvod
- Bezbednost
- Sklapanje
- Rukovanje
- Održavanje
- Transport
- Skladištenje
- Tehnički podaci
- Oprema
- Deklaracija o usaglašenosti
- Innehåll
- Introduktion
- Säkerhet
- Montering
- Drift
- underhåll
- Transport
- Förvaring
- Tekniska data
- Tillbehör
- Försäkran om överensstämmelse
- İçindekiler
- Giriş
- Güvenlik
- Montaj
- Kullanım
- Bakım
- Taşıma
- Saklama
- Teknik veriler
- Aksesuarlar
- Uyumluluk Bildirimi
- Зміст
- Вступ
- Безпека
- Збирання
- Експлуатація
- Технічне обслуговування
- Графік технічного обслуговування
- Щоденне технічне обслуговування
- Щотижневе технічне обслуговування
- Щомісячне технічне обслуговування
- Щорічне обслуговування
- Періодичне технічне обслуговування
- Налаштування швидкості холостого ходу
- Технічне обслуговування іскропоглинальної сітки
- Технічне обслуговування свічки запалювання
- Очищення повітряного фільтра
- Нагострювання ланцюга пилки
- Змащування різального обладнання
- Транспортування
- Зберігання
- Технічні характеристики
- Аксесуари
- Декларація відповідності
• 3. The felling direction
(Fig. 25)
• Always stop the engine before you move the
product.
• Make sure you firmly plant your feet on the ground
and distribute your weight evenly.
(Fig. 26)
• Only operate the product with your feet on stable
ground. Without stable ground, operation can cause
serious injury or death to the operator or others. Do
not do operate the product on a ladder or in a tree.
(Fig. 27)
Kickbacks, skating, bouncing and dropping
Different forces can have an effect on the safe control of
the product.
•
Skating is when the guide bar moves quickly across
the wood.
• Bouncing is when the guide bar lifts off the wood and
touches it again and again.
• Dropping is when the product drops down after the
cut is made. This can cause the moving chain to
touch a part of the body or other objects, causing
injury or damage.
• Kickback is when the end of the guide bar touches
objects and moves rearward, up or suddenly
forward. Kickback also occurs when the wood closes
in and pinches the saw chain during the cut. Loss of
control can result if the product touches an object in
wood.
(Fig. 28)
• Rotational Kickback can occur when the moving
chain touches an object at the top of the guide
bar. This can cause the chain to bury into the
object and cause the chain to stop immediately.
The result is a very fast, reverse reaction that
moves the guide bar up and rearward in the
direction of the operator.
(Fig. 29)
• Pinch-Kickback can occur when the saw chain
suddenly stops during the cut. The wood closes
in and pinches the moving saw chain along the
top of the guide bar. The sudden stop of the
chain reverses the chain force and causes the
product to move in the opposite direction of the
turn of the chain. The product moves rearward in
the direction of the operator.
(Fig. 30)
• Pull-In can occur when the saw chain suddenly
stops when the moving chain touches an object
in the wood along the bottom of the guide bar.
The sudden stop pulls the product forward and
away from the operator, which can easily cause
the loss of control of the product by the operator.
(Fig. 31)
Make sure that you understand the different forces
and how to prevent them before you operate the
product. See
To prevent kickbacks, skating, bouncing
and dropping on page 13
.
To prevent kickbacks, skating, bouncing and
dropping
• While the motor runs, make sure to hold the product
tightly. Keep your right hand on the rear handle and
the left hand on the front handle. Tightly hold with
thumbs and fingers around the handles. Do not let
go.
• Keep control of the product during the cut and after
the wood falls to the ground. Do not let the weight of
the product drop down after the cut is made.
• Make sure that the area in which you are cutting is
free from blockage. Do not let the nose of the guide
bar touch a log, branch or other blockages while you
operate the product. (Fig. 32)
• Cut at high motor speeds.
• Do not overreach or cut above shoulder height. (Fig.
33)
• Obey the sharpening and maintenance instructions
by the manufacturer for the saw chain.
• Only use replacement guide bars and saw chains
specified by the manufacturer.
• The risk of kickback is increased if the depth gauge
is set too large.
Personal protective equipment
• Always use the correct personal protective
equipment when you operate the product. Personal
protective equipment decreases the grade of injury if
an accident occurs, but does not erase it.
• Do not use loose clothing that can become caught in
the saw chain.
• Use an approved protective helmet.
• Always use approved ear protection while you
operate the product. Noise for a long period can
cause hearing loss.
• Use protective glasses or a face visor to decrease
the risk of injury from flying objects. The product can
move objects with strong force, such as wood chips
and small pieces of wood. This can result in serious
injury, including to the eyes.
• Use gloves with chainsaw protection.
• Use pants with chainsaw protection.
• Use boots with chainsaw protection, steel toe-caps
and nonslip soles.
• Make sure that you have a first aid kit near.
• Sparks can come from the muffler, the guide bar
and saw chain or other sources. Always keep fire
extinguishing tools and a shovel to help prevent
forest fires.
Protective devices on the product
• Do not use a product with damaged protective
equipment. If the product is damaged, speak to an
approved service center.
862 - 003 - 09.07.2022 13