Operation Manual

English – 33
TECHNICAL DATA
1156931-38 Rev.2 2016-11-29
Guide bar and saw chain combinations
The following cutting attachments are approved for the model Husqvarna 136Li.
Saw chain filing and file gauges
EC Declaration of Conformity
(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:[phone], declares under sole responsibility that the cordless
battery chainsaws Husqvarna 136Li from 2016’s serial numbers and onwards (the year is clearly stated in plain text on
the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL’S DIRECTIVES:
- of May 17, 2006 ”relating to machinery” 2006/42/EC.
- of February 26, 2014 ”relating to electromagnetic compatibility” 2014/30/EU.
- of December 12, 2006 ”relating to electrical equipment designed for use within certain voltage limits” 2006/95/EC.
- of September 6, 2006 ”on batteries and accumulators and waste batteries and accumulators” 2006/66/EC.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
The following standards have been applied: EN 60745-1, EN 60745-2-13, EN 60335-2-29, EN 55014-1, EN 55014-2.
Notified body: NB905, Intertek Deutschland Gmbh, Stagenstraße 1, 70771 Leinfelden-Echterdingen, Germany, has
carried out EC type examination in accordance with the machinery directive’s (2006/42/EC) article 12, point 3b. The
certificates for EC type examination in accordance with annex IX, have the numbers: NB905 15SHW0344-01.
For information relating to noise emissions, see the Technical data chapter.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna March 30, 2016
Lars Roos, Development manager
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
Guide bar Saw chain
Length, inch Pitch, inch Gauge, mm Max. nose radius Type
Length, drive links
(no.)
12 3/8 1,1 9T Husqvarna H38 45