Operators Manual

16
TECHNICAL DATA SHEET
Engine 137 142
Cylinder volume, cm
3
36 40
Stroke, mm 32 32
Idle speed, rpm 3,000 3,000
Recommended max.
speed, unloaded, rpm 13,000 13,000
Power, kW 1,6 1,9
Ignition system
Manufacturer RE Phelon
Type of ignition system CD
Spark plug Champion
Electrode gap, mm 0,5
Fuel and lubrication system
Manufacturer Walbro
Carburetor type WT--660
Fuel capacity, litre 0,37
Oil pump capacity at
8500 rpm, ml/min 6 -- 8
Oil capacity, litre 0,19
Type of oil pump Automatic
Weight
Without bar and chain, kg 4,6
BAR CHAIN
Length Pitch Max
Inches Inches Tip Radius
13 0,325 10T Husqvarna H30
15 0,325 10T Husqvarna
H30
Noise levels
Equivalent (see note 1) noise
pressure level at operator’s ear ,
measured according to relevant
international standards, dB(A) 98 98
Equivalent (see note 1) noise
power level, measured
according to relevant
international standards, dB(A) 108 108
Vibration levels
(see note 2)
Front handle, m/s
2
4,9 4,8
Rear handle, m/s
2
7,7 6,5
Chain/bar
Standard bar length,
in/cm 13/33 15/38
Recommended bar
lengths, in/cm 13/ 33 15/38
Usable cutting
length, in/cm 12,5/32 14,5/37
Chain speed at maximum
power, m/sec 16,3 16,3
Pitch, inches 0,325 0,325
Thickness of drive link, mm 1,3
No. of teeth on drive sprocket 7
Note 1: Equivalent noise level is, according to
ISO 7182 and ISO 9207, calculated as the
time--weighted energy total for noise levels un-
der various working conditions with the follow-
ing time distribution, 1/2 idle, 1/3 full load, 1/3
full speed.
Note2: Equivalent vibration level is, according
to ISO 7505, calculated as the time--weighted
energy total for vibration levels under various
working conditions with the following time dis-
tribution: 1/3 idle, 1/3 full load, 1/3 full speed.
142
137
H30
0,325
0,050/
1,3
3/16
4,8
85 30 10
0,025/
0,65
13/33/56
15/38/64
YEAR OF CONSTRUCTION: 2005
MANUFACTURER’S ADDRESS: Husqvarna
SE--561 82 Huskvarna
Huskvarna, Sweden