Owner's Manual

SERVICE AND ADJUSTMENTS

FIG. 32

NOTE: Figure 33 shows the bellcrank positioned too low,

causing hard disengagement or self-disengagement while

driving.

NOTE: Figure 34 shows the bellcrank positioned correctly.

The bottom of the bellcrank is horizontal, in a position paral-

lel to the top of the steering clutch. The steering yoke top

edge is in line with the middle of the flat vertical surface of

the bellcrank. Figure 35 shows an end view of the bellcrank

in the correct position.

4. Adjust the position of the steering bellcrank by turning

the adjuster to raise or lower the bellcrank. When the

bellcrank is positioned correctly, replace the plastic

power steering cover and the wheel or track.

5. Repeat the procedure for the opposite side.

STEERING BELLCRANK

STEERING

YOKE

HIGH

POSITION

STEERING

CLUTCH

FIG. 35

LOW

POSITION

FIG. 33

FIG. 34

STEERING

YOKE

STEERING BELLCRANK

CORRECT POSITION -

HORIZONTAL

STEERING YOKE

STEERING BELLCRANK

VERTICAL

SURFACE