Owner's Manual

30 - English

3. INSTALLATION

• - In the passage, the guide wire must therefore

be placed so that the mower has as much

space in which to run as possible. The distance

between the boundary wire and the guide wire

must however be at least 12” (30 cm).

If the guide wire has to be installed on a steep slope,

it is an advantage to lay the wire at an angle to the

slope. This makes it easier for the mower to follow the

guide wire on the slope.

Avoid laying the wire at sharp angles. This can make

it difficult for the mower to follow the guide wire.

4. Run the guide wire to the spot on the boundary

wire where you want to make the connection.

5. Lift out the boundary wire. Cut off the boundary

wire using a pair of wire cutters.

At least 12”/30 cm

Maximum

distance

At least 7ft/2 m

135º

90º