Operators Manual
Table Of Contents
- Symbols
- Contents
- Note the following before starting:
- Dear Customer,
- Important
- Personal protective equipment
- Machine¢s safety equipment
- Fitting the gearbox
- Assembly the cutting equipment without the hook
- Assembly the hook together with the cutting equipment
- Fitting the engine stand
- Telescopic function
- Fuel safety
- Fuel
- Fueling
- Check before starting
- Starting and stopping
- General working instructions
- Carburettor
- Muffler
- Cooling system
- Spark plug
- Air filter
- Fuel filter
- Gear
- Guide sleeve and oil seal on gearbox
- Vibrations
- Maintenance schedule
- Technical data
- Símbolos
- Índice
- Antes de arrancar, observe o seguinte:
- Prezado cliente!
- Importante
- Equipamento de protecção pessoal
- Equipamento de segurança da máquina
- Montagem da caixa de velocidades
- Montagem do equipamento de corte sem o gancho
- Montagem do gancho juntamente com o equipamento de corte
- Montagem do suporte do motor
- Função telescópica
- Segurança no manejo de combustível
- Combustível
- Abastecimento
- Controlo antes de arrancar
- Arranque e paragem
- Instruções gerais de trabalho
- Carburador
- Silenciador
- Sistema de arrefecimento
- Vela de ignição
- Filtro de ar
- Filtro de combustível
- Engrenagem
- Manga de guia e vedante do óleo na caixa de velocidades
- Vibrações
- Esquema de manutenção
- Especificações técnicas
- Simbol-simbol
- Kandungan
- Ingat perkara-perkara berikut sebelum menghidupkan:
- Pelanggan yang budiman,
- Penting
- Kelengkapan pelindung peribadi
- Kelengkapan keselamatan mesin
- Memasang kotak gear
- Pasang kelengkapan pemotong tanpa cangkuk
- Pasang cangkuk bersama dengan kelengkapan pemotong
- Memasang dirian enjin
- Fungsi teleskopik
- Keselamatan bahan bakar
- Bahan bakar
- Mengisi bahan bakar
- Periksa sebelum menghidupkannya
- Menghidupkan dan Mematikan enjin
- Arahan kerja am
- Karburetor
- Peredam bunyi
- Sistem penyejuk
- Palam pencucuh
- Penapis udara
- Penapis bahan bakar
- Gear
- Sarung panduan dan kedap minyak pada kotak gear
- Getaran
- Jadual penyengggaraan
- Data teknikal
24 – English
TECHNICAL DATA
Technical data
Note 1: Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard
deviation) of 1 dB(A).
Note 2: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
2
.
Note 3: Sound levels and vibrations levels are measured at idling and maximum speed in ration 1:3.
226PTC6 226PD3
Engine
Cylinder displacement, cm
3
25,4 25,4
Cylinder bore, mm 34 34
Stroke, mm 28 28
Recommended max. speed, rpm 10000 10000
Idle speed, rpm 3000 3000
Max. engine output, acc. to ISO 8893, kW/ rpm 0,81/7500 0,81/7500
Catalytic converter muffler No No
Ignition system
Spark plug Champion RCJ 6Y Champion RCJ 6Y
Electrode gap, mm 0,6-0,7 0,6-0,7
Fuel and lubrication system
Fuel tank capacity, litre 0,6 0,6
Weight
Weight without fuel, oil and cutting equipment, kg 8,2 6,0
Length
Length without cutting unit, mm/ft
Max length 4580/15 1940/6,4
Min. length 3150/10,3
Sound levels
(See note 1 and note 3)
Equivalent sound pressure level at the user’s ear,
measured according to EN/ISO 11680-1, dB(A)
94 92
Vibration levels
(See note 2 and note 3)
Vibration levels (a
hw
) at handles, measured according
to EN ISO 11680-1, m/s
2
226PD3
Front/rear handles 14,6/11,7
226PTC6
Short shaft front/rear handle 11,1/13,5
Extended shaft, front/rear handles 12,6/16,7
H1157097-38,226PTC6,PD3.fm Page 24 Monday, April 18, 2016 8:08 AM