Operators Manual
Table Of Contents
- Dear Customer,
- Symbols on the machine:
- What is what on the chain saw? (1)
- Contents
- Before using a new chain saw
- Important
- Always use common sense (2)
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fuelling
- Fuel safety
- Starting and stopping
- Before use: (33)
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Air filter
- Spark plug
- Maintenance schedule
- Technical data (P02138HV)
- Guide bar and saw chain combinations
- EC Declaration of Conformity
- Apreciado cliente:
- Símbolos en la máquina:
- ¿Qué es qué en la motosierra? (1)
- Índice
- Medidas a tomar antes de utilizar una motosierra nueva
- Importante
- Emplee siempre el sentido común. (2)
- Equipo de protección personal
- Equipo de seguridad de la máquina
- Freno de cadena con protección contra reculadas
- ¿Activará siempre mi mano el freno de cadena en caso de reculada?
- ¿Se activa siempre por inercia el freno de cadena cuando se produce una reculada?
- ¿Me protegerá siempre el freno de cadena contra daños si se produce una reculada?
- Fiador del acelerador
- Captor de cadena
- Protección de la mano derecha
- Sistema amortiguador de vibraciones
- Botón de parada
- Silenciador
- Equipo de corte
- Montaje de la espada y la cadena
- Carburante
- Repostaje
- Seguridad en el uso del combustible
- Arranque y parada
- Antes de utilizar la máquina: (33)
- Instrucciones generales de trabajo
- Medidas preventivas de las reculadas
- Generalidades
- Ajuste del carburador
- Control, mantenimiento y servicio del equipo de seguridad de la motosierra
- Silenciador
- Filtro de aire
- Bujía
- Programa de mantenimiento
- Datos técnicos (P02138HV)
- Combinaciones de espada y cadena
- Declaración CE de conformidad
- Bäste kund!
- Symboler på maskinen:
- Vad är vad på motorsågen? (1)
- Innehåll
- Åtgärder före användning av ny motorsåg
- Viktigt
- Använd alltid sunt förnuft (2)
- Personlig skyddsutrustning
- Maskinens säkerhetsutrustning
- Kedjebroms med kastskydd
- Kommer min hand alltid att aktivera kedjebromsen vid kast?
- Kommer tröghetsaktivering av kedjebromsen alltid ske om ett kast inträffar?
- Kommer kedjebromsen alltid att skydda mig från skador om ett kast inträffar?
- Gasreglagespärr
- Kedjefångare
- Högerhandsskydd
- Avvibreringssystem
- Stoppkontakt
- Ljuddämpare
- Skärutrustning
- Montering av svärd och kedja
- Drivmedel
- Tankning
- Bränslesäkerhet
- Start och stopp
- Före varje användning: (33)
- Allmänna arbetsinstruktioner
- Kastförebyggande åtgärder
- Allmänt
- Förgasarjustering
- Kontroll, underhåll och service av motorsågens säkerhetsutrustning
- Ljuddämpare
- Luftfilter
- Tändstift
- Underhållsschema
- Tekniska data (P02138HV)
- Svärd och kedjekombinationer
- EG-försäkran om överensstämmelse
- Hyvä asiakas!
- Koneessa esiintyvät tunnukset:
- Moottorisahan osat (1)
- Sisältö
- Toimenpiteet ennen uuden moottorisahan käyttöä
- Tärkeää
- Käytä aina tervettä järkeä (2)
- Henkilökohtainen suojavarustus
- Koneen turvalaitteet
- Takapotkusuojuksella varustettu ketjujarru
- Aktivoiko käteni aina ketjujarrun takapotkun yhteydessä?
- Pysäyttääkö automaattinen pysäytystoiminto ketjun aina, jos takapotku tapahtuu?
- Suojaako ketjujarru minua vahingoilta aina, jos takapotku tapahtuu?
- Kaasuliipasimen varmistin
- Ketjusieppo
- Rystyssuojus
- Tärinänvaimennus
- Pysäytin
- Äänenvaimennin
- Terälaite
- Terälevyn ja ketjun asennus
- Polttoaine
- Tankkaus
- Polttoaineturvallisuus
- Käynnistys ja pysäytys
- Aina ennen käyttöä: (33)
- Yleiset työohjeet
- Takapotkua ehkäisevät toimenpiteet
- Yleistä
- Kaasuttimen säätö
- Moottorisahan turvalaitteiden tarkastus, kunnossapito ja huolto
- Äänenvaimennin
- Ilmansuodatin
- Sytytystulppa
- Huoltokaavio
- Tekniset tiedot (P02138HV)
- Terälevy- ja ketjuyhdistelmät
- EY-vaatimustenmukaisuusvakuutus
- Til vore kunder!
- Symboler på maskinen:
- Hvad er hvad på motorsaven? (1)
- Indhold
- Forberedelser, inden en ny motorsav tages i brug
- Vigtigt
- Brug altid din sunde fornuft. (2)
- Personligt beskyttelsesudstyr
- Maskinens sikkerhedsudstyr
- Kædebremse med kastbeskyttelse
- Vil min hånd altid aktivere kædebremsen i tilfælde af kast?
- Vil træghedsaktiveringen af kædebremsen altid forekomme, hvis der indtræder et kast?
- Beskytter kædebremsen mig konstant mod skader i tilfælde af kast?
- Gasreguleringslås
- Kædefanger
- Højrehåndsbeskyttelse
- Vibrationsdæmpningssystem
- Stopkontakt
- Lyddæmper
- Skæreudstyr
- Montering af sværd og kæde
- Drivmiddel
- Tankning
- Brændstofsikkerhed
- Start og stop
- Før hver anvendelse: (33)
- Generelle arbejdsinstruktioner
- Kastforebyggende foranstaltninger
- Generelt
- Karburatorjustering
- Kontrol, vedligeholdelse og service af motorsavens sikkerhedsudstyr
- Lyddæmper
- Luftfilter
- Tændrør
- Vedligeholdelsesskema
- Tekniske data (P02138HV)
- Sværd- og kædekombinationer
- EF-overensstemmelseserklæring
- Kjære kunde
- Symboler på maskinen:
- Hva er hva på motorsagen? (1)
- Innhold
- Tiltak før bruk av en ny motorsag
- Viktig
- Bruk alltid sunn fornuft (2)
- Personlig verneutstyr
- Maskinens sikkerhetsutstyr
- Kjedebrems med kastbeskyttelse
- Vil min hånd alltid aktivere kjedebresmen ved kast?
- Vil treghetsaktivering av kjedebremsen alltid skjer hvis det inntreffer et kast?
- Vil kjedebremsen alltid beskytte meg mot skader hvis et kast inntreffer?
- Gassregulatorsperre
- Kjedefanger
- Høyrehåndsvern
- Avvibreringssystem
- Stoppbryter
- Lyddemper
- Skjæreutstyr
- Montering av sverd og kjede
- Brennstoff
- Fylling av brennstoff
- Brennstoffsikkerhet
- Start og stopp
- Før hver gangs bruk: (33)
- Generelle arbeidsinstruksjoner
- Kastforebyggende tiltak
- Generelt
- Forgasserjustering
- Kontroll, vedlikehold og service på motorsagens sikkerhetsutstyr
- Lyddemper
- Luftfilter
- Tennplugg
- Vedlikeholdsskjema
- Tekniske data (P02138HV)
- Sverd og kjedekombinasjoner
- EF-erklæring om samsvar
- Alla gentile clientela
- I simboli sulla macchina:
- Che cosa c’è nella motosega? (1)
- Indice
- Interventi prima di usare una nuova motosega
- Importante
- Impiegare sempre il buon senso. (2)
- Abbigliamento protettivo
- Dispositivi di sicurezza della macchina
- Freno della catena con protezione anticontraccolpo
- È sufficiente il contatto con la mano per attivare sempre il freno della catena in caso di sobbalzo?
- Il freno della catena è sempre attivato dalla funzione di inerzia in caso di sobbalzo?
- Il freno della catena protegge sempre l’utente da danni in caso di sobbalzo?
- Fermo del gas
- Fermo della catena
- Protezione della mano destra
- Sistema di smorzamento delle vibrazioni
- Interruttore di arresto
- Marmitta
- Attrezzatura di taglio
- Montaggio di lama e catena
- Carburante
- Rifornimento
- Carburante
- Avviamento e arresto
- Ad ogni utilizzo: (33)
- Istruzioni generali di lavoro
- Prevenzione del contraccolpo
- Generalità
- Regolazione del carburatore
- Controllo, manutenzione e servizio dei dispositivi di sicurezza della motosega
- Marmitta
- Filtro dell’aria
- Candela
- Schema di manutenzione
- Caratteristiche tecniche (P02138HV)
- Combinazioni di lama e catena
- Dichiarazione di conformità CE
- Prezado cliente!
- Símbolos na máquina:
- Como se chama, na moto-serra? (1)
- Índice
- Precauções antes de usar a nova moto-serra
- Importante
- Use sempre o seu bom senso (2)
- Equipamento de protecção pessoal
- Equipamento de segurança da máquina
- Travão de corrente com protector anti- retrocesso
- A minha mão activará sempre o travão da corrente na ocorrência de um retrocesso?
- A activação do travão da corrente por inércia funcionará sempre na ocorrência de um retrocesso?
- O travão da corrente proteger-me-á sempre de ferimentos na ocorrência de um retrocesso?
- Bloqueio do acelerador
- Retentor de corrente
- Protector da mão direita
- Sistema anti-vibração
- Contacto de paragem
- Silenciador
- Equipamento de corte
- Montagem da lâmina e corrente
- Combustível
- Abastecimento
- Segurança no manejo de combustível
- Arranque e paragem
- Sempre, antes de usar: (33)
- Instruções gerais de trabalho
- Medidas de prevenção contra retrocessos
- Noções gerais
- Afinação do carburador
- Controlo, manutenção e assistência ao equipamento de segurança da moto-serra
- Silenciador
- Filtro de ar
- Vela de ignição
- Esquema de manutenção
- Especificações técnicas (P02138HV)
- Combinações de lâmina e corrente
- Certificado CE de conformidade
- °Á·ðËÙ¤ ðÂÏ¿ÙË!
- ™‡ÌßÔÏ· ð¿Óˆ ÛÙÔ Ì˯¿ÓËÌ·:
- ÆÈ Â›Ó·È ÙÈ ÛÙÔ ·Ï˘ÛÔðÚ›ÔÓÔ; (1)
- ¶ÂÚȯfiÌÂÓ·
- ¶Ó¤ÚÁÂȘ ðÚÈÓ ı¤ÛÂÙ Û ÏÂÈÙÔ˘ÚÁ›· ¤Ó· ηÈÓÔ‡ÚÁÈÔ ðÚÈfiÓÈ
- ™ËÌ·ÓÙÈÎfi
- ÃÚËÛÈÌÔðÔț٠ð¿ÓÙÔÙ ÎÔÈÓ‹ ÏÔÁÈ΋ (2)
- °ÙÔÌÈÎfi˜ ðÚÔÛٷ٢ÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜
- ¶ÚÔÛٷ٢ÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜ ÙÔ˘ Ì˯·Ó‹Ì·ÙÔ˜
- °Ï˘ÛfiÊÚÂÓÔ Ì ðÚÔÊ˘Ï·ÎÙ‹Ú· ÙÈÓ¿ÁÌ·ÙÔ˜
- £· ÌðÔÚ› ð¿ÓÙÔÙ ÙÔ ¯¤ÚÈ ÌÔ˘ Ó· ÂÓÂÚÁÔðÔÈ› ÙÔ ÊÚ¤ÓÔ ·Ï˘Û›‰·˜ Û ÎψÙÛ‹Ì·Ù·;
- £· ÂÓÂÚÁÔðÔÈÂ›Ù·È ð¿ÓÙÔÙÂ Ë ÏÂÈÙÔ˘ÚÁ›· Ù˘ ·‰Ú¿ÓÂÈ·˜ ÙÔ˘ ÊÚ¤ÓÔ˘ ·Ï˘Û›‰·˜ fiÙ·Ó Ï·Ìß¿ÓÂÈ ¯ÒÚ· ¤Ó· ÎÏÒÙÛËÌ·;
- £· Ì ðÚÔÛٷهÂÈ ð¿ÓÙÔÙ ÙÔ ÊÚ¤ÓÔ ·Ï˘Û›‰·˜ ·ðfi ÙÚ·˘Ì·ÙÈÛÌfi Û ðÂÚ›ðÙˆÛË ðÔ˘ Û˘Ìß› ÎÏÒÙÛËÌ·;
- °ÛÊ¿ÏÂÈ· Áη˙ÈÔ‡
- °ÛÊ¿ÏÂÈ· Û˘ÁÎÚ¿ÙËÛ˘ ·Ï˘Û›‰·˜
- ¶ÚÔÊ˘Ï·ÎÙ‹Ú·˜ ‰ÂÍÈÔ‡ ¯ÂÚÈÔ‡
- ™‡ÛÙËÌ· ·ðfiÛßÂÛ˘ ÎÚ·‰·ÛÌÒÓ
- ¢È·ÎfiðÙ˘ ™ÙÔð
- ™ÈÁ·ÛÙ‹Ú·˜
- ºÔðÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜
- MÔÓÙ¿ÚÈÛÌ· Ô‰ËÁÔ‡ Î·È ·Ï˘Û›‰·˜
- M›ÁÌ· η˘Û›ÌÔ˘
- °¤ÌÈÛÌ· ÚÂ˙ÂÚßÔ˘¿Ú
- °ÛÊ¿ÏÂÈ· η˘Û›ÌˆÓ
- .ÂΛÓËÌ· Î·È ÛÙ·Ì¿ÙËÌ·
- ¶ÚÈÓ ·ðfi ÔðÔÈ·‰‹ðÔÙ ¯Ú‹ÛË: (33)
- °ÂÓÈΤ˜ Ô‰ËÁ›Â˜ ÂÚÁ·Û›·˜
- ¶Ó¤ÚÁÂȘ ðÚfiÏ˄˘ ÙÈÓ¿ÁÌ·ÙÔ˜
- °ÂÓÈο
- ƒ‡ıÌÈÛË Î·ÚÌðÈÚ·Ù¤Ú
- ¶ÏÂÁ¯Ô˜, Û˘ÓÙ‹ÚËÛË Î·È Û¤ÚßȘ ÙÔ˘ ðÚÔÛٷ٢ÙÈÎÔ‡ ÂÍÔðÏÈÛÌÔ‡ ÙÔ˘ ·Ï˘ÛÔðÚ›ÔÓÔ˘
- ™ÈÁ·ÛÙ‹Ú·˜
- º›ÏÙÚÔ ·¤Ú·
- MðÔ˘˙›
- ¶ÚfiÁÚ·ÌÌ· Û˘ÓÙ‹ÚËÛ˘
- ƯÓÈο ÛÙÔȯ›· (P02138HV)
- ™˘Ó‰˘·ÛÌÔ› Ô‰ËÁÔ‡ Î·È ·Ï˘Û›‰·˜
- ¶K-µÂß·›ˆÛË Û˘Ìʈӛ·˜
- VáÏen˘ zákazníku,
- Symboly vyobrazené na tûlese stroje:
- Co je co na motorové pile? (1)
- Obsah
- Pfied zahájením práce s novou motorovou pilou
- Upozornûní
- VÏdy pouÏívejte zdrav˘ rozum (2)
- Osobní ochranné pomÛcky
- Bezpeãnostní vybavení stroje
- Brzda fietûzu a chrániã levé ruky
- Bude moje ruka aktivovat brzdu fietûzu vÏdy v pfiípadû zpûtného odrazu?
- Spustí se aktivace brzdy fietûzu setrvaãností vÏdy, kdyÏ dojde ke zpûtnému odrazu?
- Ochrání mû brzda fietûzu v pfiípadû zpûtného odrazu vÏdy pfied zranûním?
- Pojistka páãky plynu
- Zachycovaã fietûzu
- Chrániã pravé ruky
- Antivibraãní systém
- Stop spínaã (vypínaã zapalování)
- Tlumiã v˘fuku
- ¤ezn˘ mechanismus
- MontáÏ fiezné li‰ty a fietûzu
- Palivo
- Plnûní paliva
- Bezpeãnost pfii manipulaci s palivem
- Startování a vypínání
- Pfied kaÏd˘m pouÏitím: (33)
- Obecné pracovní pokyny
- Jak zabránit zpûtnému rázu
- V‰eobecnû
- Nastavení karburátoru
- Kontrola a údrÏba bezpeãnostního vybavení motorové pily
- Tlumiã v˘fuku
- Vzduchov˘ filtr
- Zapalovací svíãka
- Schema technické údrÏby
- Technické údaje (P02138HV)
- Kombinace li‰ty a fietûzu
- ES Prohlá‰ení o shodû
- VáÏen˘ zákazník,
- Symboly na stroji:
- âo je ão na reÈazovej píle? (1)
- Obsah
- Pred pouÏitím novej reÈazovej píly
- DôleÏité
- VÏdy sa riaìte zdrav˘m rozumom (2)
- Osobné ochranné prostriedky
- Bezpeãnostné vybavenie stroja
- Brzda reÈaze a predn˘ chrániã ruky
- Spustím brzdu reÈaze rukou vÏdy v prípade spätného nárazu?
- Spustí zotrvaãnosÈ brzdu reÈaze vÏdy v prípade spätného nárazu?
- Zabráni brzda poraneniu vÏdy v prípade spätného nárazu?
- Poistná páãka plynu
- Zachytávaã reÈaze
- Ochrann˘ kryt pravej ruky
- Systém na tlmenie vibrácií
- Vypínaã
- Tlmiã v˘fuku
- Rezacia ãasÈ
- Namontovanie vodiacej li‰ty a reÈaze
- Palivo
- DopæÀanie paliva
- BezpeãnosÈ práce s palivom
- ·tart a stop
- Pred pouÏitím: (33)
- V‰eobecné pracovné pokyny
- Ako sa vyhnúÈ spätnému nárazu
- V‰eobecné
- Nastavenie karburátora
- Kontrola, údrÏba a servis bezpeãnostného vybavenia reÈazovej píly
- Tlmiã v˘fuku
- Vzduchov˘ filter
- Zapaºovacia svieãka
- Plán údrÏby
- Technické údaje (P02138HV)
- Kombinovanie vodiacej li‰ty a reÈaze
- EÚ vyhlásenie o zhode
- Spo‰tovani kupec!
- Simboli na stroju:
- Kaj je kaj na motorni Ïagi? (1)
- Vsebina
- Postopek pred prvo uporabo nove motorne Ïage
- Pomembno
- Zmeraj uporabljajte zdrav razum (2)
- Osebna za‰ãitna oprema
- Varnostna oprema stroja
- Zavora verige s ‰ãitnikom
- Ali bo moja roka v primeru odsunka zmeraj aktivirala zavoro za Ïago?
- Ali se bo zavora zmeraj vztrajnostno aktivirala, ko pride do odsunka?
- Ali bo me zavora za Ïago v primeru odsunka zmeraj varovala pred po‰kodbami?
- Zapora plina
- Lovilec verige
- ·ãitnik desne roke
- Sistem du‰enja tresljajev
- Izklopno stikalo
- Du‰ilec
- Rezila
- MontaÏa meãa in verige
- Pogonsko gorivo
- Toãenje goriva
- Varna uporaba goriva
- VÏig in izklop
- Pred vsako uporabo: (33)
- Splo‰na navodila za delo
- Prepreãevanje odsunka
- Splo‰no
- Nastavitev uplinjaãa
- Kontrola, vzdrÏevanje in servis varnostne opreme motorne Ïage
- Du‰ilec
- Zraãni filter
- Sveãka
- Urnik vzdrÏevanja
- Tehniãni podatki (P02138HV)
- Kombinacije meãa in verige
- ES-Izjava o skladnosti
GENERAL SAFETY PRECAUTIONS / ASSEMBLY
English – 13
1156558-26 Rev.1 2014-01-13
• Check that the bar tip sprocket turns freely and that the
lubricating hole in the tip sprocket is not blocked. Clean
and lubricate if necessary.
If the chain lubrication system is still not working after
carrying out the above checks and associated measures
you should contact your service agent.
Chain drive sprocket
The clutch drum is fitted with a Spur sprocket (the chain
sprocket is welded on the drum).
Regularly check the degree of wear on the drive sprocket.
Replace if wear is excessive. Replace the drive sprocket
whenever you replace the chain.
Checking wear on cutting equipment
Check the chain daily for:
• Visible cracks in rivets and links.
• Whether the chain is stiff.
• Whether rivets and links are badly worn.
Replace the saw chain if it exhibits any of the points above.
We recommend you compare the existing chain with a new
chain to decide how badly the existing chain is worn.
When the length of the cutting teeth has worn down to only
4 mm the chain must be replaced.
Bar
Check regularly:
• Whether there are burrs on the edges of the bar.
Remove these with a file if necessary.
(15)
• Whether the groove in the bar has become badly worn.
Replace the bar if necessary.
(16)
• Whether the tip of the bar is uneven or badly worn. If a
hollow forms on the underside of the bar tip this is due
to running with a slack chain.
• To prolong the life of the bar you should turn it over daily.
Fitting the bar and chain
Check that the chain brake is in disengaged position by
moving the front hand guard towards the front handle.
Remove the knob and remove the clutch cover (chain
brake). Take off the transportation ring (A).
(17)
Fit the bar over the bar bolts. Place the bar in its rearmost
position. Place the chain over the drive sprocket locate it in
the groove on the bar. Begin on the top edge of the bar.
(18)
Make sure that the edges of the cutting links are facing
forward on the top edge of the bar.
Fit the clutch cover (chain brake) and locate the chain
adjuster pin in the cut-out in the bar. Check that the drive
links of the chain fit correctly on the drive sprocket and that
the chain is in the groove on the bar.
(19)
Tension the chain by turning the wheel down (+). The chain
should be tensioned until it does not sag from the
underside of the bar.
(12)
The chain is correctly tensioned when it does not sag from
the underside of the bar, but can still be turned easily by
hand. Hold up the bar tip and tighten the bar knob by
turning the knob clockwise.
(13)
When fitting a new chain, the chain tension has to be
checked frequently until the chain is run-in. Check the
chain tension regularly. A correctly tensioned chain
ensures good cutting performance and long life.
(20)
Fitting a spike bumper
To fit a spike bumper – contact your service agent.
!
WARNING! Most chain saw accidents
happen when the chain touches the
operator.
Wear personal protective equipment.
See instructions under the heading
Personal protective equipment.
Do not tackle any job that you feel you
are not adequately trained for. See
instructions under the headings
Personal protective equipment, How to
avoid kickback, Cutting equipment and
General working instructions.
Avoid situations where there is a risk of
kickback. See instructions under the
heading Machine
′′
′′
s safety equipment.
Use the recommended protective
equipment and check its condition. See
instructions under the heading General
working instructions.
Check that all the chain saw safety
features are working. See instructions
under the headings General working
instructions and General safety
precautions.
!
WARNING! Switch off the engine before
carrying out any checks or maintenance.
The stop switch automatically returns to
the start position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark
plug when assembling, checking and/or
performing maintenance.
Always wear gloves, when working with
the chain, in order to protect your hands
from injury.