Operators Manual
Table Of Contents
- Dear Customer,
- Symbols on the machine:
- What is what on the chain saw? (1)
- Contents
- Before using a new chain saw
- Important
- Always use common sense (2)
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fuelling
- Fuel safety
- Starting and stopping
- Before use: (33)
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Air filter
- Spark plug
- Maintenance schedule
- Technical data (P02138HV)
- Guide bar and saw chain combinations
- EC Declaration of Conformity
- Apreciado cliente:
- Símbolos en la máquina:
- ¿Qué es qué en la motosierra? (1)
- Índice
- Medidas a tomar antes de utilizar una motosierra nueva
- Importante
- Emplee siempre el sentido común. (2)
- Equipo de protección personal
- Equipo de seguridad de la máquina
- Freno de cadena con protección contra reculadas
- ¿Activará siempre mi mano el freno de cadena en caso de reculada?
- ¿Se activa siempre por inercia el freno de cadena cuando se produce una reculada?
- ¿Me protegerá siempre el freno de cadena contra daños si se produce una reculada?
- Fiador del acelerador
- Captor de cadena
- Protección de la mano derecha
- Sistema amortiguador de vibraciones
- Botón de parada
- Silenciador
- Equipo de corte
- Montaje de la espada y la cadena
- Carburante
- Repostaje
- Seguridad en el uso del combustible
- Arranque y parada
- Antes de utilizar la máquina: (33)
- Instrucciones generales de trabajo
- Medidas preventivas de las reculadas
- Generalidades
- Ajuste del carburador
- Control, mantenimiento y servicio del equipo de seguridad de la motosierra
- Silenciador
- Filtro de aire
- Bujía
- Programa de mantenimiento
- Datos técnicos (P02138HV)
- Combinaciones de espada y cadena
- Declaración CE de conformidad
- Bäste kund!
- Symboler på maskinen:
- Vad är vad på motorsågen? (1)
- Innehåll
- Åtgärder före användning av ny motorsåg
- Viktigt
- Använd alltid sunt förnuft (2)
- Personlig skyddsutrustning
- Maskinens säkerhetsutrustning
- Kedjebroms med kastskydd
- Kommer min hand alltid att aktivera kedjebromsen vid kast?
- Kommer tröghetsaktivering av kedjebromsen alltid ske om ett kast inträffar?
- Kommer kedjebromsen alltid att skydda mig från skador om ett kast inträffar?
- Gasreglagespärr
- Kedjefångare
- Högerhandsskydd
- Avvibreringssystem
- Stoppkontakt
- Ljuddämpare
- Skärutrustning
- Montering av svärd och kedja
- Drivmedel
- Tankning
- Bränslesäkerhet
- Start och stopp
- Före varje användning: (33)
- Allmänna arbetsinstruktioner
- Kastförebyggande åtgärder
- Allmänt
- Förgasarjustering
- Kontroll, underhåll och service av motorsågens säkerhetsutrustning
- Ljuddämpare
- Luftfilter
- Tändstift
- Underhållsschema
- Tekniska data (P02138HV)
- Svärd och kedjekombinationer
- EG-försäkran om överensstämmelse
- Hyvä asiakas!
- Koneessa esiintyvät tunnukset:
- Moottorisahan osat (1)
- Sisältö
- Toimenpiteet ennen uuden moottorisahan käyttöä
- Tärkeää
- Käytä aina tervettä järkeä (2)
- Henkilökohtainen suojavarustus
- Koneen turvalaitteet
- Takapotkusuojuksella varustettu ketjujarru
- Aktivoiko käteni aina ketjujarrun takapotkun yhteydessä?
- Pysäyttääkö automaattinen pysäytystoiminto ketjun aina, jos takapotku tapahtuu?
- Suojaako ketjujarru minua vahingoilta aina, jos takapotku tapahtuu?
- Kaasuliipasimen varmistin
- Ketjusieppo
- Rystyssuojus
- Tärinänvaimennus
- Pysäytin
- Äänenvaimennin
- Terälaite
- Terälevyn ja ketjun asennus
- Polttoaine
- Tankkaus
- Polttoaineturvallisuus
- Käynnistys ja pysäytys
- Aina ennen käyttöä: (33)
- Yleiset työohjeet
- Takapotkua ehkäisevät toimenpiteet
- Yleistä
- Kaasuttimen säätö
- Moottorisahan turvalaitteiden tarkastus, kunnossapito ja huolto
- Äänenvaimennin
- Ilmansuodatin
- Sytytystulppa
- Huoltokaavio
- Tekniset tiedot (P02138HV)
- Terälevy- ja ketjuyhdistelmät
- EY-vaatimustenmukaisuusvakuutus
- Til vore kunder!
- Symboler på maskinen:
- Hvad er hvad på motorsaven? (1)
- Indhold
- Forberedelser, inden en ny motorsav tages i brug
- Vigtigt
- Brug altid din sunde fornuft. (2)
- Personligt beskyttelsesudstyr
- Maskinens sikkerhedsudstyr
- Kædebremse med kastbeskyttelse
- Vil min hånd altid aktivere kædebremsen i tilfælde af kast?
- Vil træghedsaktiveringen af kædebremsen altid forekomme, hvis der indtræder et kast?
- Beskytter kædebremsen mig konstant mod skader i tilfælde af kast?
- Gasreguleringslås
- Kædefanger
- Højrehåndsbeskyttelse
- Vibrationsdæmpningssystem
- Stopkontakt
- Lyddæmper
- Skæreudstyr
- Montering af sværd og kæde
- Drivmiddel
- Tankning
- Brændstofsikkerhed
- Start og stop
- Før hver anvendelse: (33)
- Generelle arbejdsinstruktioner
- Kastforebyggende foranstaltninger
- Generelt
- Karburatorjustering
- Kontrol, vedligeholdelse og service af motorsavens sikkerhedsudstyr
- Lyddæmper
- Luftfilter
- Tændrør
- Vedligeholdelsesskema
- Tekniske data (P02138HV)
- Sværd- og kædekombinationer
- EF-overensstemmelseserklæring
- Kjære kunde
- Symboler på maskinen:
- Hva er hva på motorsagen? (1)
- Innhold
- Tiltak før bruk av en ny motorsag
- Viktig
- Bruk alltid sunn fornuft (2)
- Personlig verneutstyr
- Maskinens sikkerhetsutstyr
- Kjedebrems med kastbeskyttelse
- Vil min hånd alltid aktivere kjedebresmen ved kast?
- Vil treghetsaktivering av kjedebremsen alltid skjer hvis det inntreffer et kast?
- Vil kjedebremsen alltid beskytte meg mot skader hvis et kast inntreffer?
- Gassregulatorsperre
- Kjedefanger
- Høyrehåndsvern
- Avvibreringssystem
- Stoppbryter
- Lyddemper
- Skjæreutstyr
- Montering av sverd og kjede
- Brennstoff
- Fylling av brennstoff
- Brennstoffsikkerhet
- Start og stopp
- Før hver gangs bruk: (33)
- Generelle arbeidsinstruksjoner
- Kastforebyggende tiltak
- Generelt
- Forgasserjustering
- Kontroll, vedlikehold og service på motorsagens sikkerhetsutstyr
- Lyddemper
- Luftfilter
- Tennplugg
- Vedlikeholdsskjema
- Tekniske data (P02138HV)
- Sverd og kjedekombinasjoner
- EF-erklæring om samsvar
- Alla gentile clientela
- I simboli sulla macchina:
- Che cosa c’è nella motosega? (1)
- Indice
- Interventi prima di usare una nuova motosega
- Importante
- Impiegare sempre il buon senso. (2)
- Abbigliamento protettivo
- Dispositivi di sicurezza della macchina
- Freno della catena con protezione anticontraccolpo
- È sufficiente il contatto con la mano per attivare sempre il freno della catena in caso di sobbalzo?
- Il freno della catena è sempre attivato dalla funzione di inerzia in caso di sobbalzo?
- Il freno della catena protegge sempre l’utente da danni in caso di sobbalzo?
- Fermo del gas
- Fermo della catena
- Protezione della mano destra
- Sistema di smorzamento delle vibrazioni
- Interruttore di arresto
- Marmitta
- Attrezzatura di taglio
- Montaggio di lama e catena
- Carburante
- Rifornimento
- Carburante
- Avviamento e arresto
- Ad ogni utilizzo: (33)
- Istruzioni generali di lavoro
- Prevenzione del contraccolpo
- Generalità
- Regolazione del carburatore
- Controllo, manutenzione e servizio dei dispositivi di sicurezza della motosega
- Marmitta
- Filtro dell’aria
- Candela
- Schema di manutenzione
- Caratteristiche tecniche (P02138HV)
- Combinazioni di lama e catena
- Dichiarazione di conformità CE
- Prezado cliente!
- Símbolos na máquina:
- Como se chama, na moto-serra? (1)
- Índice
- Precauções antes de usar a nova moto-serra
- Importante
- Use sempre o seu bom senso (2)
- Equipamento de protecção pessoal
- Equipamento de segurança da máquina
- Travão de corrente com protector anti- retrocesso
- A minha mão activará sempre o travão da corrente na ocorrência de um retrocesso?
- A activação do travão da corrente por inércia funcionará sempre na ocorrência de um retrocesso?
- O travão da corrente proteger-me-á sempre de ferimentos na ocorrência de um retrocesso?
- Bloqueio do acelerador
- Retentor de corrente
- Protector da mão direita
- Sistema anti-vibração
- Contacto de paragem
- Silenciador
- Equipamento de corte
- Montagem da lâmina e corrente
- Combustível
- Abastecimento
- Segurança no manejo de combustível
- Arranque e paragem
- Sempre, antes de usar: (33)
- Instruções gerais de trabalho
- Medidas de prevenção contra retrocessos
- Noções gerais
- Afinação do carburador
- Controlo, manutenção e assistência ao equipamento de segurança da moto-serra
- Silenciador
- Filtro de ar
- Vela de ignição
- Esquema de manutenção
- Especificações técnicas (P02138HV)
- Combinações de lâmina e corrente
- Certificado CE de conformidade
- °Á·ðËÙ¤ ðÂÏ¿ÙË!
- ™‡ÌßÔÏ· ð¿Óˆ ÛÙÔ Ì˯¿ÓËÌ·:
- ÆÈ Â›Ó·È ÙÈ ÛÙÔ ·Ï˘ÛÔðÚ›ÔÓÔ; (1)
- ¶ÂÚȯfiÌÂÓ·
- ¶Ó¤ÚÁÂȘ ðÚÈÓ ı¤ÛÂÙ Û ÏÂÈÙÔ˘ÚÁ›· ¤Ó· ηÈÓÔ‡ÚÁÈÔ ðÚÈfiÓÈ
- ™ËÌ·ÓÙÈÎfi
- ÃÚËÛÈÌÔðÔț٠ð¿ÓÙÔÙ ÎÔÈÓ‹ ÏÔÁÈ΋ (2)
- °ÙÔÌÈÎfi˜ ðÚÔÛٷ٢ÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜
- ¶ÚÔÛٷ٢ÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜ ÙÔ˘ Ì˯·Ó‹Ì·ÙÔ˜
- °Ï˘ÛfiÊÚÂÓÔ Ì ðÚÔÊ˘Ï·ÎÙ‹Ú· ÙÈÓ¿ÁÌ·ÙÔ˜
- £· ÌðÔÚ› ð¿ÓÙÔÙ ÙÔ ¯¤ÚÈ ÌÔ˘ Ó· ÂÓÂÚÁÔðÔÈ› ÙÔ ÊÚ¤ÓÔ ·Ï˘Û›‰·˜ Û ÎψÙÛ‹Ì·Ù·;
- £· ÂÓÂÚÁÔðÔÈÂ›Ù·È ð¿ÓÙÔÙÂ Ë ÏÂÈÙÔ˘ÚÁ›· Ù˘ ·‰Ú¿ÓÂÈ·˜ ÙÔ˘ ÊÚ¤ÓÔ˘ ·Ï˘Û›‰·˜ fiÙ·Ó Ï·Ìß¿ÓÂÈ ¯ÒÚ· ¤Ó· ÎÏÒÙÛËÌ·;
- £· Ì ðÚÔÛٷهÂÈ ð¿ÓÙÔÙ ÙÔ ÊÚ¤ÓÔ ·Ï˘Û›‰·˜ ·ðfi ÙÚ·˘Ì·ÙÈÛÌfi Û ðÂÚ›ðÙˆÛË ðÔ˘ Û˘Ìß› ÎÏÒÙÛËÌ·;
- °ÛÊ¿ÏÂÈ· Áη˙ÈÔ‡
- °ÛÊ¿ÏÂÈ· Û˘ÁÎÚ¿ÙËÛ˘ ·Ï˘Û›‰·˜
- ¶ÚÔÊ˘Ï·ÎÙ‹Ú·˜ ‰ÂÍÈÔ‡ ¯ÂÚÈÔ‡
- ™‡ÛÙËÌ· ·ðfiÛßÂÛ˘ ÎÚ·‰·ÛÌÒÓ
- ¢È·ÎfiðÙ˘ ™ÙÔð
- ™ÈÁ·ÛÙ‹Ú·˜
- ºÔðÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜
- MÔÓÙ¿ÚÈÛÌ· Ô‰ËÁÔ‡ Î·È ·Ï˘Û›‰·˜
- M›ÁÌ· η˘Û›ÌÔ˘
- °¤ÌÈÛÌ· ÚÂ˙ÂÚßÔ˘¿Ú
- °ÛÊ¿ÏÂÈ· η˘Û›ÌˆÓ
- .ÂΛÓËÌ· Î·È ÛÙ·Ì¿ÙËÌ·
- ¶ÚÈÓ ·ðfi ÔðÔÈ·‰‹ðÔÙ ¯Ú‹ÛË: (33)
- °ÂÓÈΤ˜ Ô‰ËÁ›Â˜ ÂÚÁ·Û›·˜
- ¶Ó¤ÚÁÂȘ ðÚfiÏ˄˘ ÙÈÓ¿ÁÌ·ÙÔ˜
- °ÂÓÈο
- ƒ‡ıÌÈÛË Î·ÚÌðÈÚ·Ù¤Ú
- ¶ÏÂÁ¯Ô˜, Û˘ÓÙ‹ÚËÛË Î·È Û¤ÚßȘ ÙÔ˘ ðÚÔÛٷ٢ÙÈÎÔ‡ ÂÍÔðÏÈÛÌÔ‡ ÙÔ˘ ·Ï˘ÛÔðÚ›ÔÓÔ˘
- ™ÈÁ·ÛÙ‹Ú·˜
- º›ÏÙÚÔ ·¤Ú·
- MðÔ˘˙›
- ¶ÚfiÁÚ·ÌÌ· Û˘ÓÙ‹ÚËÛ˘
- ƯÓÈο ÛÙÔȯ›· (P02138HV)
- ™˘Ó‰˘·ÛÌÔ› Ô‰ËÁÔ‡ Î·È ·Ï˘Û›‰·˜
- ¶K-µÂß·›ˆÛË Û˘Ìʈӛ·˜
- VáÏen˘ zákazníku,
- Symboly vyobrazené na tûlese stroje:
- Co je co na motorové pile? (1)
- Obsah
- Pfied zahájením práce s novou motorovou pilou
- Upozornûní
- VÏdy pouÏívejte zdrav˘ rozum (2)
- Osobní ochranné pomÛcky
- Bezpeãnostní vybavení stroje
- Brzda fietûzu a chrániã levé ruky
- Bude moje ruka aktivovat brzdu fietûzu vÏdy v pfiípadû zpûtného odrazu?
- Spustí se aktivace brzdy fietûzu setrvaãností vÏdy, kdyÏ dojde ke zpûtnému odrazu?
- Ochrání mû brzda fietûzu v pfiípadû zpûtného odrazu vÏdy pfied zranûním?
- Pojistka páãky plynu
- Zachycovaã fietûzu
- Chrániã pravé ruky
- Antivibraãní systém
- Stop spínaã (vypínaã zapalování)
- Tlumiã v˘fuku
- ¤ezn˘ mechanismus
- MontáÏ fiezné li‰ty a fietûzu
- Palivo
- Plnûní paliva
- Bezpeãnost pfii manipulaci s palivem
- Startování a vypínání
- Pfied kaÏd˘m pouÏitím: (33)
- Obecné pracovní pokyny
- Jak zabránit zpûtnému rázu
- V‰eobecnû
- Nastavení karburátoru
- Kontrola a údrÏba bezpeãnostního vybavení motorové pily
- Tlumiã v˘fuku
- Vzduchov˘ filtr
- Zapalovací svíãka
- Schema technické údrÏby
- Technické údaje (P02138HV)
- Kombinace li‰ty a fietûzu
- ES Prohlá‰ení o shodû
- VáÏen˘ zákazník,
- Symboly na stroji:
- âo je ão na reÈazovej píle? (1)
- Obsah
- Pred pouÏitím novej reÈazovej píly
- DôleÏité
- VÏdy sa riaìte zdrav˘m rozumom (2)
- Osobné ochranné prostriedky
- Bezpeãnostné vybavenie stroja
- Brzda reÈaze a predn˘ chrániã ruky
- Spustím brzdu reÈaze rukou vÏdy v prípade spätného nárazu?
- Spustí zotrvaãnosÈ brzdu reÈaze vÏdy v prípade spätného nárazu?
- Zabráni brzda poraneniu vÏdy v prípade spätného nárazu?
- Poistná páãka plynu
- Zachytávaã reÈaze
- Ochrann˘ kryt pravej ruky
- Systém na tlmenie vibrácií
- Vypínaã
- Tlmiã v˘fuku
- Rezacia ãasÈ
- Namontovanie vodiacej li‰ty a reÈaze
- Palivo
- DopæÀanie paliva
- BezpeãnosÈ práce s palivom
- ·tart a stop
- Pred pouÏitím: (33)
- V‰eobecné pracovné pokyny
- Ako sa vyhnúÈ spätnému nárazu
- V‰eobecné
- Nastavenie karburátora
- Kontrola, údrÏba a servis bezpeãnostného vybavenia reÈazovej píly
- Tlmiã v˘fuku
- Vzduchov˘ filter
- Zapaºovacia svieãka
- Plán údrÏby
- Technické údaje (P02138HV)
- Kombinovanie vodiacej li‰ty a reÈaze
- EÚ vyhlásenie o zhode
- Spo‰tovani kupec!
- Simboli na stroju:
- Kaj je kaj na motorni Ïagi? (1)
- Vsebina
- Postopek pred prvo uporabo nove motorne Ïage
- Pomembno
- Zmeraj uporabljajte zdrav razum (2)
- Osebna za‰ãitna oprema
- Varnostna oprema stroja
- Zavora verige s ‰ãitnikom
- Ali bo moja roka v primeru odsunka zmeraj aktivirala zavoro za Ïago?
- Ali se bo zavora zmeraj vztrajnostno aktivirala, ko pride do odsunka?
- Ali bo me zavora za Ïago v primeru odsunka zmeraj varovala pred po‰kodbami?
- Zapora plina
- Lovilec verige
- ·ãitnik desne roke
- Sistem du‰enja tresljajev
- Izklopno stikalo
- Du‰ilec
- Rezila
- MontaÏa meãa in verige
- Pogonsko gorivo
- Toãenje goriva
- Varna uporaba goriva
- VÏig in izklop
- Pred vsako uporabo: (33)
- Splo‰na navodila za delo
- Prepreãevanje odsunka
- Splo‰no
- Nastavitev uplinjaãa
- Kontrola, vzdrÏevanje in servis varnostne opreme motorne Ïage
- Du‰ilec
- Zraãni filter
- Sveãka
- Urnik vzdrÏevanja
- Tehniãni podatki (P02138HV)
- Kombinacije meãa in verige
- ES-Izjava o skladnosti
FUEL HANDLING / STARTING AND STOPPING
English – 15
1156558-26 Rev.1 2014-01-13
Transport and storage
• Always store the chain saw and fuel so that there is no
risk of leakages or fumes coming into contact with
sparks or naked flames from electrical equipment,
electric motors, relays/switches, boilers and the like.
• Always store fuel in an approved container designed for
that purpose.
• For longer periods of storage or for transport of the
chain saw, the fuel and chain oil tanks should be
emptied. Ask where you can dispose of waste fuel and
chain oil at your local petrol station.
• Ensure the machine is cleaned and that a complete
service is carried out before long-term storage.
• The bar guard must always be fitted to the cutting
attachment when the machine is being transported or in
storage, in order to prevent accident contact with the
sharp chain. Even a non-moving chain can cause
serious cuts to yourself or persons you bump into with
an exposed chain.
• Secure the machine during transport.
Long-term storage
Empty the fuel/oil tanks in a well ventilated area. Store the
fuel in approved cans in a safe place. Fit the bar guard.
Clean the machine. See instructions under the heading
Maintenance schedule.
Starting and stopping
Cold engine
Starting: The chain brake must be engaged when the
chain saw is started. Activate the brake by moving the front
hand guard forwards.
(21)
1. Air purge: Press the air purge repeatedly until fuel begins
to fill the bulb. The bulb need not be completely filled.
(24)
2. Choke: Pull the blue choke/fast idle lever out to the full
extent (to the
FULL CHOKE position). When the choke/
fast idle lever is pulled out to the full extent, the correct
throttle setting is set automatically.
(22)
Start throttle: The correct choke/start throttle setting is
obtained by moving the control to the choke position.
(23)
Starting
Grip the front handle with your left hand. Hold the chain
saw on the ground by placing your right foot through the
rear handle.
3. Pull the starter handle with your right hand and pull out
the starter cord slowly until you feel a resistance (as the
starter pawls engage) then pull firmly and rapidly.
Never
twist the starter cord around your hand.
(26)
CAUTION! Do not pull the starter cord all the way out and
do not let go of the starter handle when the cord is fully
extended. This can damage the machine.
4. Push in the choke control to the ”1/2 choke” setting as
soon as the engine fires which can be heard through a
"puff" sound.
(22)
5. Keep on pulling the cord powerfully until the engine
starts.
(27) Allow engine to warm for thirty seconds, then
squeeze throttle trigger to set normal idle.
As the chain brake is still engaged the speed of the engine
must be set to idling as soon as possible, this is achieved by
quickly pressing the throttle trigger once. This prevents
unnecessary wear to the clutch, clutch drum and brake band.
Note! Reactivate the chain brake by pushing the front hand
guard back (marked ”PULL BACK TO RESET”) towards
the front handle.
(28) The chain saw is now ready for use.
There is a simplified start reminder with illustrations to
describe each step on the rear edge of the saw (A)
.
Warm engine
Use the same procedure as for starting a cold engine but
without setting the choke control in the choke position. Set
the throttle to the start position by pulling out the blue
choke control to the choke position and then pushing it in
again.
(25)
• Never start a chain saw unless the bar, chain and all
covers are fitted correctly. See instructions under the
heading Assembly. Without a bar and chain attached to
the chain saw the clutch can come loose and cause
serious injury.
(29)
• The chain brake should be activated when starting. See
instructions under the heading Start and stop. Do not
drop start. This method is very dangerous because you
may lose control of the saw.
(30)
• Never start the machine indoors. Exhaust fumes can be
dangerous if inhaled.
• Observe your surroundings and make sure that there is
no risk of people or animals coming into contact with the
cutting equipment.
• Always hold the saw with both hands. The right hand
should be on the rear handle, and the left hand on the
front handle. All people, whether right or left handed,
should use this grip. Use a firm grip with thumbs and
fingers encircling the chain saw handles.
(31)
Stopping
Stop the engine by pressing down the stop button. (32)
!
WARNING! Note the following before
starting:
The chain brake must be engaged when
the chain saw is started to reduce the
chance of contact with the moving chain
during starting.
Never start a chain saw unless the bar,
chain and all covers are fitted correctly.
Otherwise the clutch can come loose
and cause personal injuries.
Place the machine on firm ground. Make
sure you have a secure footing and that
the chain cannot touch anything.
Keep people and animals well away from
the working area.
!
WARNING! Long term inhalation of the
engine’s exhaust fumes, chain oil mist
and dust from sawdust can represent a
health risk.