Operators Manual
Table Of Contents
- Dear Customer,
- Symbols on the machine:
- What is what on the chain saw? (1)
- Contents
- Before using a new chain saw
- Important
- Always use common sense (2)
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fuelling
- Fuel safety
- Starting and stopping
- Before use: (33)
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Air filter
- Spark plug
- Maintenance schedule
- Technical data (P02138HV)
- Guide bar and saw chain combinations
- EC Declaration of Conformity
- Apreciado cliente:
- Símbolos en la máquina:
- ¿Qué es qué en la motosierra? (1)
- Índice
- Medidas a tomar antes de utilizar una motosierra nueva
- Importante
- Emplee siempre el sentido común. (2)
- Equipo de protección personal
- Equipo de seguridad de la máquina
- Freno de cadena con protección contra reculadas
- ¿Activará siempre mi mano el freno de cadena en caso de reculada?
- ¿Se activa siempre por inercia el freno de cadena cuando se produce una reculada?
- ¿Me protegerá siempre el freno de cadena contra daños si se produce una reculada?
- Fiador del acelerador
- Captor de cadena
- Protección de la mano derecha
- Sistema amortiguador de vibraciones
- Botón de parada
- Silenciador
- Equipo de corte
- Montaje de la espada y la cadena
- Carburante
- Repostaje
- Seguridad en el uso del combustible
- Arranque y parada
- Antes de utilizar la máquina: (33)
- Instrucciones generales de trabajo
- Medidas preventivas de las reculadas
- Generalidades
- Ajuste del carburador
- Control, mantenimiento y servicio del equipo de seguridad de la motosierra
- Silenciador
- Filtro de aire
- Bujía
- Programa de mantenimiento
- Datos técnicos (P02138HV)
- Combinaciones de espada y cadena
- Declaración CE de conformidad
- Bäste kund!
- Symboler på maskinen:
- Vad är vad på motorsågen? (1)
- Innehåll
- Åtgärder före användning av ny motorsåg
- Viktigt
- Använd alltid sunt förnuft (2)
- Personlig skyddsutrustning
- Maskinens säkerhetsutrustning
- Kedjebroms med kastskydd
- Kommer min hand alltid att aktivera kedjebromsen vid kast?
- Kommer tröghetsaktivering av kedjebromsen alltid ske om ett kast inträffar?
- Kommer kedjebromsen alltid att skydda mig från skador om ett kast inträffar?
- Gasreglagespärr
- Kedjefångare
- Högerhandsskydd
- Avvibreringssystem
- Stoppkontakt
- Ljuddämpare
- Skärutrustning
- Montering av svärd och kedja
- Drivmedel
- Tankning
- Bränslesäkerhet
- Start och stopp
- Före varje användning: (33)
- Allmänna arbetsinstruktioner
- Kastförebyggande åtgärder
- Allmänt
- Förgasarjustering
- Kontroll, underhåll och service av motorsågens säkerhetsutrustning
- Ljuddämpare
- Luftfilter
- Tändstift
- Underhållsschema
- Tekniska data (P02138HV)
- Svärd och kedjekombinationer
- EG-försäkran om överensstämmelse
- Hyvä asiakas!
- Koneessa esiintyvät tunnukset:
- Moottorisahan osat (1)
- Sisältö
- Toimenpiteet ennen uuden moottorisahan käyttöä
- Tärkeää
- Käytä aina tervettä järkeä (2)
- Henkilökohtainen suojavarustus
- Koneen turvalaitteet
- Takapotkusuojuksella varustettu ketjujarru
- Aktivoiko käteni aina ketjujarrun takapotkun yhteydessä?
- Pysäyttääkö automaattinen pysäytystoiminto ketjun aina, jos takapotku tapahtuu?
- Suojaako ketjujarru minua vahingoilta aina, jos takapotku tapahtuu?
- Kaasuliipasimen varmistin
- Ketjusieppo
- Rystyssuojus
- Tärinänvaimennus
- Pysäytin
- Äänenvaimennin
- Terälaite
- Terälevyn ja ketjun asennus
- Polttoaine
- Tankkaus
- Polttoaineturvallisuus
- Käynnistys ja pysäytys
- Aina ennen käyttöä: (33)
- Yleiset työohjeet
- Takapotkua ehkäisevät toimenpiteet
- Yleistä
- Kaasuttimen säätö
- Moottorisahan turvalaitteiden tarkastus, kunnossapito ja huolto
- Äänenvaimennin
- Ilmansuodatin
- Sytytystulppa
- Huoltokaavio
- Tekniset tiedot (P02138HV)
- Terälevy- ja ketjuyhdistelmät
- EY-vaatimustenmukaisuusvakuutus
- Til vore kunder!
- Symboler på maskinen:
- Hvad er hvad på motorsaven? (1)
- Indhold
- Forberedelser, inden en ny motorsav tages i brug
- Vigtigt
- Brug altid din sunde fornuft. (2)
- Personligt beskyttelsesudstyr
- Maskinens sikkerhedsudstyr
- Kædebremse med kastbeskyttelse
- Vil min hånd altid aktivere kædebremsen i tilfælde af kast?
- Vil træghedsaktiveringen af kædebremsen altid forekomme, hvis der indtræder et kast?
- Beskytter kædebremsen mig konstant mod skader i tilfælde af kast?
- Gasreguleringslås
- Kædefanger
- Højrehåndsbeskyttelse
- Vibrationsdæmpningssystem
- Stopkontakt
- Lyddæmper
- Skæreudstyr
- Montering af sværd og kæde
- Drivmiddel
- Tankning
- Brændstofsikkerhed
- Start og stop
- Før hver anvendelse: (33)
- Generelle arbejdsinstruktioner
- Kastforebyggende foranstaltninger
- Generelt
- Karburatorjustering
- Kontrol, vedligeholdelse og service af motorsavens sikkerhedsudstyr
- Lyddæmper
- Luftfilter
- Tændrør
- Vedligeholdelsesskema
- Tekniske data (P02138HV)
- Sværd- og kædekombinationer
- EF-overensstemmelseserklæring
- Kjære kunde
- Symboler på maskinen:
- Hva er hva på motorsagen? (1)
- Innhold
- Tiltak før bruk av en ny motorsag
- Viktig
- Bruk alltid sunn fornuft (2)
- Personlig verneutstyr
- Maskinens sikkerhetsutstyr
- Kjedebrems med kastbeskyttelse
- Vil min hånd alltid aktivere kjedebresmen ved kast?
- Vil treghetsaktivering av kjedebremsen alltid skjer hvis det inntreffer et kast?
- Vil kjedebremsen alltid beskytte meg mot skader hvis et kast inntreffer?
- Gassregulatorsperre
- Kjedefanger
- Høyrehåndsvern
- Avvibreringssystem
- Stoppbryter
- Lyddemper
- Skjæreutstyr
- Montering av sverd og kjede
- Brennstoff
- Fylling av brennstoff
- Brennstoffsikkerhet
- Start og stopp
- Før hver gangs bruk: (33)
- Generelle arbeidsinstruksjoner
- Kastforebyggende tiltak
- Generelt
- Forgasserjustering
- Kontroll, vedlikehold og service på motorsagens sikkerhetsutstyr
- Lyddemper
- Luftfilter
- Tennplugg
- Vedlikeholdsskjema
- Tekniske data (P02138HV)
- Sverd og kjedekombinasjoner
- EF-erklæring om samsvar
- Alla gentile clientela
- I simboli sulla macchina:
- Che cosa c’è nella motosega? (1)
- Indice
- Interventi prima di usare una nuova motosega
- Importante
- Impiegare sempre il buon senso. (2)
- Abbigliamento protettivo
- Dispositivi di sicurezza della macchina
- Freno della catena con protezione anticontraccolpo
- È sufficiente il contatto con la mano per attivare sempre il freno della catena in caso di sobbalzo?
- Il freno della catena è sempre attivato dalla funzione di inerzia in caso di sobbalzo?
- Il freno della catena protegge sempre l’utente da danni in caso di sobbalzo?
- Fermo del gas
- Fermo della catena
- Protezione della mano destra
- Sistema di smorzamento delle vibrazioni
- Interruttore di arresto
- Marmitta
- Attrezzatura di taglio
- Montaggio di lama e catena
- Carburante
- Rifornimento
- Carburante
- Avviamento e arresto
- Ad ogni utilizzo: (33)
- Istruzioni generali di lavoro
- Prevenzione del contraccolpo
- Generalità
- Regolazione del carburatore
- Controllo, manutenzione e servizio dei dispositivi di sicurezza della motosega
- Marmitta
- Filtro dell’aria
- Candela
- Schema di manutenzione
- Caratteristiche tecniche (P02138HV)
- Combinazioni di lama e catena
- Dichiarazione di conformità CE
- Prezado cliente!
- Símbolos na máquina:
- Como se chama, na moto-serra? (1)
- Índice
- Precauções antes de usar a nova moto-serra
- Importante
- Use sempre o seu bom senso (2)
- Equipamento de protecção pessoal
- Equipamento de segurança da máquina
- Travão de corrente com protector anti- retrocesso
- A minha mão activará sempre o travão da corrente na ocorrência de um retrocesso?
- A activação do travão da corrente por inércia funcionará sempre na ocorrência de um retrocesso?
- O travão da corrente proteger-me-á sempre de ferimentos na ocorrência de um retrocesso?
- Bloqueio do acelerador
- Retentor de corrente
- Protector da mão direita
- Sistema anti-vibração
- Contacto de paragem
- Silenciador
- Equipamento de corte
- Montagem da lâmina e corrente
- Combustível
- Abastecimento
- Segurança no manejo de combustível
- Arranque e paragem
- Sempre, antes de usar: (33)
- Instruções gerais de trabalho
- Medidas de prevenção contra retrocessos
- Noções gerais
- Afinação do carburador
- Controlo, manutenção e assistência ao equipamento de segurança da moto-serra
- Silenciador
- Filtro de ar
- Vela de ignição
- Esquema de manutenção
- Especificações técnicas (P02138HV)
- Combinações de lâmina e corrente
- Certificado CE de conformidade
- °Á·ðËÙ¤ ðÂÏ¿ÙË!
- ™‡ÌßÔÏ· ð¿Óˆ ÛÙÔ Ì˯¿ÓËÌ·:
- ÆÈ Â›Ó·È ÙÈ ÛÙÔ ·Ï˘ÛÔðÚ›ÔÓÔ; (1)
- ¶ÂÚȯfiÌÂÓ·
- ¶Ó¤ÚÁÂȘ ðÚÈÓ ı¤ÛÂÙ Û ÏÂÈÙÔ˘ÚÁ›· ¤Ó· ηÈÓÔ‡ÚÁÈÔ ðÚÈfiÓÈ
- ™ËÌ·ÓÙÈÎfi
- ÃÚËÛÈÌÔðÔț٠ð¿ÓÙÔÙ ÎÔÈÓ‹ ÏÔÁÈ΋ (2)
- °ÙÔÌÈÎfi˜ ðÚÔÛٷ٢ÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜
- ¶ÚÔÛٷ٢ÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜ ÙÔ˘ Ì˯·Ó‹Ì·ÙÔ˜
- °Ï˘ÛfiÊÚÂÓÔ Ì ðÚÔÊ˘Ï·ÎÙ‹Ú· ÙÈÓ¿ÁÌ·ÙÔ˜
- £· ÌðÔÚ› ð¿ÓÙÔÙ ÙÔ ¯¤ÚÈ ÌÔ˘ Ó· ÂÓÂÚÁÔðÔÈ› ÙÔ ÊÚ¤ÓÔ ·Ï˘Û›‰·˜ Û ÎψÙÛ‹Ì·Ù·;
- £· ÂÓÂÚÁÔðÔÈÂ›Ù·È ð¿ÓÙÔÙÂ Ë ÏÂÈÙÔ˘ÚÁ›· Ù˘ ·‰Ú¿ÓÂÈ·˜ ÙÔ˘ ÊÚ¤ÓÔ˘ ·Ï˘Û›‰·˜ fiÙ·Ó Ï·Ìß¿ÓÂÈ ¯ÒÚ· ¤Ó· ÎÏÒÙÛËÌ·;
- £· Ì ðÚÔÛٷهÂÈ ð¿ÓÙÔÙ ÙÔ ÊÚ¤ÓÔ ·Ï˘Û›‰·˜ ·ðfi ÙÚ·˘Ì·ÙÈÛÌfi Û ðÂÚ›ðÙˆÛË ðÔ˘ Û˘Ìß› ÎÏÒÙÛËÌ·;
- °ÛÊ¿ÏÂÈ· Áη˙ÈÔ‡
- °ÛÊ¿ÏÂÈ· Û˘ÁÎÚ¿ÙËÛ˘ ·Ï˘Û›‰·˜
- ¶ÚÔÊ˘Ï·ÎÙ‹Ú·˜ ‰ÂÍÈÔ‡ ¯ÂÚÈÔ‡
- ™‡ÛÙËÌ· ·ðfiÛßÂÛ˘ ÎÚ·‰·ÛÌÒÓ
- ¢È·ÎfiðÙ˘ ™ÙÔð
- ™ÈÁ·ÛÙ‹Ú·˜
- ºÔðÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜
- MÔÓÙ¿ÚÈÛÌ· Ô‰ËÁÔ‡ Î·È ·Ï˘Û›‰·˜
- M›ÁÌ· η˘Û›ÌÔ˘
- °¤ÌÈÛÌ· ÚÂ˙ÂÚßÔ˘¿Ú
- °ÛÊ¿ÏÂÈ· η˘Û›ÌˆÓ
- .ÂΛÓËÌ· Î·È ÛÙ·Ì¿ÙËÌ·
- ¶ÚÈÓ ·ðfi ÔðÔÈ·‰‹ðÔÙ ¯Ú‹ÛË: (33)
- °ÂÓÈΤ˜ Ô‰ËÁ›Â˜ ÂÚÁ·Û›·˜
- ¶Ó¤ÚÁÂȘ ðÚfiÏ˄˘ ÙÈÓ¿ÁÌ·ÙÔ˜
- °ÂÓÈο
- ƒ‡ıÌÈÛË Î·ÚÌðÈÚ·Ù¤Ú
- ¶ÏÂÁ¯Ô˜, Û˘ÓÙ‹ÚËÛË Î·È Û¤ÚßȘ ÙÔ˘ ðÚÔÛٷ٢ÙÈÎÔ‡ ÂÍÔðÏÈÛÌÔ‡ ÙÔ˘ ·Ï˘ÛÔðÚ›ÔÓÔ˘
- ™ÈÁ·ÛÙ‹Ú·˜
- º›ÏÙÚÔ ·¤Ú·
- MðÔ˘˙›
- ¶ÚfiÁÚ·ÌÌ· Û˘ÓÙ‹ÚËÛ˘
- ƯÓÈο ÛÙÔȯ›· (P02138HV)
- ™˘Ó‰˘·ÛÌÔ› Ô‰ËÁÔ‡ Î·È ·Ï˘Û›‰·˜
- ¶K-µÂß·›ˆÛË Û˘Ìʈӛ·˜
- VáÏen˘ zákazníku,
- Symboly vyobrazené na tûlese stroje:
- Co je co na motorové pile? (1)
- Obsah
- Pfied zahájením práce s novou motorovou pilou
- Upozornûní
- VÏdy pouÏívejte zdrav˘ rozum (2)
- Osobní ochranné pomÛcky
- Bezpeãnostní vybavení stroje
- Brzda fietûzu a chrániã levé ruky
- Bude moje ruka aktivovat brzdu fietûzu vÏdy v pfiípadû zpûtného odrazu?
- Spustí se aktivace brzdy fietûzu setrvaãností vÏdy, kdyÏ dojde ke zpûtnému odrazu?
- Ochrání mû brzda fietûzu v pfiípadû zpûtného odrazu vÏdy pfied zranûním?
- Pojistka páãky plynu
- Zachycovaã fietûzu
- Chrániã pravé ruky
- Antivibraãní systém
- Stop spínaã (vypínaã zapalování)
- Tlumiã v˘fuku
- ¤ezn˘ mechanismus
- MontáÏ fiezné li‰ty a fietûzu
- Palivo
- Plnûní paliva
- Bezpeãnost pfii manipulaci s palivem
- Startování a vypínání
- Pfied kaÏd˘m pouÏitím: (33)
- Obecné pracovní pokyny
- Jak zabránit zpûtnému rázu
- V‰eobecnû
- Nastavení karburátoru
- Kontrola a údrÏba bezpeãnostního vybavení motorové pily
- Tlumiã v˘fuku
- Vzduchov˘ filtr
- Zapalovací svíãka
- Schema technické údrÏby
- Technické údaje (P02138HV)
- Kombinace li‰ty a fietûzu
- ES Prohlá‰ení o shodû
- VáÏen˘ zákazník,
- Symboly na stroji:
- âo je ão na reÈazovej píle? (1)
- Obsah
- Pred pouÏitím novej reÈazovej píly
- DôleÏité
- VÏdy sa riaìte zdrav˘m rozumom (2)
- Osobné ochranné prostriedky
- Bezpeãnostné vybavenie stroja
- Brzda reÈaze a predn˘ chrániã ruky
- Spustím brzdu reÈaze rukou vÏdy v prípade spätného nárazu?
- Spustí zotrvaãnosÈ brzdu reÈaze vÏdy v prípade spätného nárazu?
- Zabráni brzda poraneniu vÏdy v prípade spätného nárazu?
- Poistná páãka plynu
- Zachytávaã reÈaze
- Ochrann˘ kryt pravej ruky
- Systém na tlmenie vibrácií
- Vypínaã
- Tlmiã v˘fuku
- Rezacia ãasÈ
- Namontovanie vodiacej li‰ty a reÈaze
- Palivo
- DopæÀanie paliva
- BezpeãnosÈ práce s palivom
- ·tart a stop
- Pred pouÏitím: (33)
- V‰eobecné pracovné pokyny
- Ako sa vyhnúÈ spätnému nárazu
- V‰eobecné
- Nastavenie karburátora
- Kontrola, údrÏba a servis bezpeãnostného vybavenia reÈazovej píly
- Tlmiã v˘fuku
- Vzduchov˘ filter
- Zapaºovacia svieãka
- Plán údrÏby
- Technické údaje (P02138HV)
- Kombinovanie vodiacej li‰ty a reÈaze
- EÚ vyhlásenie o zhode
- Spo‰tovani kupec!
- Simboli na stroju:
- Kaj je kaj na motorni Ïagi? (1)
- Vsebina
- Postopek pred prvo uporabo nove motorne Ïage
- Pomembno
- Zmeraj uporabljajte zdrav razum (2)
- Osebna za‰ãitna oprema
- Varnostna oprema stroja
- Zavora verige s ‰ãitnikom
- Ali bo moja roka v primeru odsunka zmeraj aktivirala zavoro za Ïago?
- Ali se bo zavora zmeraj vztrajnostno aktivirala, ko pride do odsunka?
- Ali bo me zavora za Ïago v primeru odsunka zmeraj varovala pred po‰kodbami?
- Zapora plina
- Lovilec verige
- ·ãitnik desne roke
- Sistem du‰enja tresljajev
- Izklopno stikalo
- Du‰ilec
- Rezila
- MontaÏa meãa in verige
- Pogonsko gorivo
- Toãenje goriva
- Varna uporaba goriva
- VÏig in izklop
- Pred vsako uporabo: (33)
- Splo‰na navodila za delo
- Prepreãevanje odsunka
- Splo‰no
- Nastavitev uplinjaãa
- Kontrola, vzdrÏevanje in servis varnostne opreme motorne Ïage
- Du‰ilec
- Zraãni filter
- Sveãka
- Urnik vzdrÏevanja
- Tehniãni podatki (P02138HV)
- Kombinacije meãa in verige
- ES-Izjava o skladnosti
WORKING TECHNIQUES
English – 17
1156558-26 Rev.1 2014-01-13
8 Unless the user resists this pushing force there is a risk
that the chain saw will move so far backwards that only
the kickback zone of the bar is in contact with the tree,
which will lead to a kickback.
(36)
Cutting with the bottom edge of the bar, i.e. from the top
of the object downwards, is known as cutting on the pull
stroke. In this case the chain saw pulls itself towards the
tree and the front edge of the chain saw body rests
naturally on the trunk when cutting. Cutting on the pull
stroke gives the operator better control over the chain
saw and the position of the kickback zone.
9 Follow the instructions on sharpening and maintaining
your bar and chain. When you replace the bar and chain
use only combinations that are recommended by us.
See instructions under the headings Cutting equipment
and Technical data.
Basic cutting technique
General
• Always use full throttle when cutting!
• Reduce the speed to idle after every cut (running the
engine for too long at full throttle without any load, i.e.
without any resistance from the chain during cutting,
can lead to serious engine damage).
• Cutting from above = Cutting on the pull stroke.
• Cutting from below = Cutting on the push stroke.
Cutting on the push stroke increases the risk of kickback.
See instructions under the heading How to avoid kickback.
Terms
Cutting = General term for cutting through wood.
Limbing = Cutting branches off a felled tree.
Splitting = When the object you are cutting breaks off
before the cut is complete.
There are five important factors you should consider
before making a cut:
1 Make sure the cutting equipment will not jam in the cut.
2 Make sure the object you are cutting will not split.
3 Make sure the chain will not strike the ground or any
other object during or after cutting.
4 Is there a risk of kickback?
5 Do the conditions and surrounding terrain affect how
safely you can stand and move about?
Two factors decide whether the chain will jam or the object
that you are cutting will split: the first is how the object is
supported before and after cutting, and the second is
whether it is in tension.
In most cases you can avoid these problems by cutting in
two stages; from the top and from the bottom. You need to
support the object so that it will not trap the chain or split
during cutting.
The following instructions describe how to handle the
commonest situations you are likely to encounter when
using a chain saw.
Limbing
When limbing thick branches you should use the same
approach as for cutting.
Cut difficult branches piece by piece.
Cutting
If you have a pile of logs, each log you attempt to cut should
be removed from the pile, placed on a saw horse or
runners and cut individually.
Remove the cut pieces from the cutting area. By leaving
them in the cutting area, you increase the risk for
inadvertently getting a kickback, as well as increasing the
risk of losing your balance while working.
The log is lying on the ground. There is little risk of the
chain jamming or the object splitting. However there is a
risk that the chain will touch the ground when you finish the
cut.
Cut all the way through the log from above. Avoid letting the
chain touch the ground as you finish the cut. Maintain full
throttle but be prepared for what might happen.
(37)
If it is possible (can you turn the log?) stop cutting about 2/
3 of the way through the log.
Turn the log and finish the cut from the opposite side.
The log is supported at one end. There is a high risk that
it will split.
Start by cutting from below (about 1/3 of the way through).
Finish by cutting from above so that the two cuts meet.
The log is supported at both ends. There is a high risk
that the chain will jam.
Start by cutting from above (about 1/3 of the way through).
Finish by cutting from below so that the two cuts meet.
Tree felling technique
Safe distance
The safe distance between a tree that is to be felled and
anyone else working nearby is at least 2 1/2 tree lengths.
Make sure that no-one else is in this ”risk zone” before or
during felling.
(38)
Felling direction
The aim is to fell the tree in a position where you can limb
and cross-cut the log as easily as possible. You want it to
fall in a location where you can stand and move about
safely.
Once you have decided which way you want the tree to fall
you must judge which way the tree would fall naturally.
Several factors affect this:
• Lean of the tree
• Bend
!
WARNING! Never use a chain saw by
holding it with one hand. A chain saw is
not safely controlled with one hand.
Always have a secure, firm grip around
the handles with both hands.
IMPORTANT! If the chain jams in the cut: stop the
engine! Don’t try to pull the chain saw free. If you do
you may be injured by the chain when the chain saw
suddenly breaks free. Use a lever to open up the cut
and free the chain saw.
!
WARNING! Never attempt to cut logs
while they are in a pile or when a couple
of logs are lying together. Such
procedures drastically increase the risk
of kickback which can result in a serious
or fatal injury.
IMPORTANT! It takes a lot of experience to fell a tree.
Inexperienced users of chain saws should not fell trees.
Do not attempt any task that you feel unsure of!