Operators Manual

English – 23
TECHNICAL DATA
1156558-26 Rev.1 2014-01-13
Guide bar and saw chain combinations
The following cutting attachments are approved for the models Husqvarna 235e, 236e, 240e and 240e TrioBrake.
EC Declaration of Conformity
Issuer’s name: Husqvarna AB, SE-561 82 Huskvarna, Sweden (Tel: [phone]).
Husqvarna AB claims sole responsibility for the gasoline chain saw plattform(s) P02138HV representing model(s)
Husqvarna 235e, 236e, 240e, 240e TrioBrake from 2013 serial numbers and on-wards. The plattform number and model
number are clearly stated in plain text on the type plate along with the year with subsequent serial numbers.
The object of the declaration described above is in conformity with the requirements of the Council’s Directives:
2006/42/EC ”relating to machinery” 17 May 2006.
2004/108/EC ”relating to electromagnetic compability” 15 Dec 2004.
2000/14/EC ”relating to noise emissions in the environment” 08 May 2000.
In accordance with Annex V, the declared sound values are stated in the technical data sheet of the operator’s manual.
For information relating to noise emissions, see the Technical data chapter.
The following standards have been applied:
EN ISO 12100:2010, EN ISO 11681-1:2011, CISPR 12:2007, ISO 14982:2009
Notified body:
TÜV Rheinland LGA Products GmbH.
Notified Body for machinery (notified under 0197).
Tillystraße 2 - 90431 Nürnberg, Germany.
TÜV Rheinland N.A. has carried out EC type examination in accordance with the machinery directive’s (2006/42/EC) article
12, point 3b. The certificate for EC type examination in accordance with annex IX, has the number: BM 50266943
This voluntary type examination certificate is applicable to all manufacturing locations and Countries of Origin, as stated
on the product.
The supplied chain saw conforms to the example that underwent EC type examination.
Signed on behalf of: Husqvarna AB, Huskvarna, Sweden, 01-12-2013.
Ronnie E. Goldman, Director of Engineering. (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
Guide bar Saw chian
Length, inch Pitch, inch Gauge, mm Max. nose radius Type
Length, drive
links (no.)
13 0,325
1,3
10T Husqvarna H30
56
15 0,325 64
16 0,325 66
14 3/8
7T
Husqvarna H37,
Oregon 91PX
52
16 3/8 56
18 3/8 62