Operators Manual

INTRODUCTION / CONTENTS
English – 7
1156558-26 Rev.1 2014-01-13
What is what on the chain saw?
(1)
1 Product and serial number plate
2 Throttle lockout (Prevents accidental operation of
throttle control.)
3 Front handle
4 Cylinder cover
5 Front hand guard
6 Muffler
7 Spike bumper
8 Bar tip sprocket
9 Rear handle with right hand guard
10 Throttle control
11 Clutch cover
12 Chain catcher
13 Guide bar
14 Saw chain
15 Starter handle
16 Chain oil tank
17 Starter
18 Fuel tank
19 Choke control/Start throttle lock
20 Rear handle
21 Stop switch (Ignition on/off switch)
22 Adjuster screws carburettor
23 Air purge
24 Information and warning decal
25 Chain tensioner wheel
26 Knob
27 Guide bar cover
28 Combination spanner
29 Operator′s manual
30 Right-hand brake trigger (240e TrioBrake)
Contents
INTRODUCTION
Dear Customer, .......................................................... 6
Symbols on the machine: .......................................... 6
What is what on the chain saw? ................................ 7
CONTENTS
Contents .................................................................... 7
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw .................................... 8
Important .................................................................... 8
Always use common sense ........................................ 8
Personal protective equipment ................................... 9
Machine′s safety equipment ....................................... 9
Cutting equipment ...................................................... 10
ASSEMBLY
Fitting the bar and chain ............................................. 13
FUEL HANDLING
Fuel ............................................................................ 14
Fuelling ....................................................................... 14
Fuel safety .................................................................. 14
STARTING AND STOPPING
Starting and stopping ................................................. 15
WORKING TECHNIQUES
Before use: ................................................................. 16
General working instructions ...................................... 16
How to avoid kickback ................................................ 19
MAINTENANCE
General ...................................................................... 19
Carburettor adjustment .............................................. 19
Checking, maintaining and servicing chain saw safety
equipment ..................................................................
19
Muffler ........................................................................ 20
Air filter ....................................................................... 20
Spark plug .................................................................. 20
Maintenance schedule ............................................... 21
TECHNICAL DATA
Technical data ............................................................ 22
Bar and chain combinations ....................................... 23
EC-declaration of conformity ...................................... 23