Operators Manual
Table Of Contents
- Dear Customer,
- Symbols on the machine:
- What is what on the chain saw? (1)
- Contents
- Before using a new chain saw
- Important
- Always use common sense (2)
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fuelling
- Fuel safety
- Starting and stopping
- Before use: (33)
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Air filter
- Spark plug
- Maintenance schedule
- Technical data (P02138HV)
- Guide bar and saw chain combinations
- EC Declaration of Conformity
- Apreciado cliente:
- Símbolos en la máquina:
- ¿Qué es qué en la motosierra? (1)
- Índice
- Medidas a tomar antes de utilizar una motosierra nueva
- Importante
- Emplee siempre el sentido común. (2)
- Equipo de protección personal
- Equipo de seguridad de la máquina
- Freno de cadena con protección contra reculadas
- ¿Activará siempre mi mano el freno de cadena en caso de reculada?
- ¿Se activa siempre por inercia el freno de cadena cuando se produce una reculada?
- ¿Me protegerá siempre el freno de cadena contra daños si se produce una reculada?
- Fiador del acelerador
- Captor de cadena
- Protección de la mano derecha
- Sistema amortiguador de vibraciones
- Botón de parada
- Silenciador
- Equipo de corte
- Montaje de la espada y la cadena
- Carburante
- Repostaje
- Seguridad en el uso del combustible
- Arranque y parada
- Antes de utilizar la máquina: (33)
- Instrucciones generales de trabajo
- Medidas preventivas de las reculadas
- Generalidades
- Ajuste del carburador
- Control, mantenimiento y servicio del equipo de seguridad de la motosierra
- Silenciador
- Filtro de aire
- Bujía
- Programa de mantenimiento
- Datos técnicos (P02138HV)
- Combinaciones de espada y cadena
- Declaración CE de conformidad
- Bäste kund!
- Symboler på maskinen:
- Vad är vad på motorsågen? (1)
- Innehåll
- Åtgärder före användning av ny motorsåg
- Viktigt
- Använd alltid sunt förnuft (2)
- Personlig skyddsutrustning
- Maskinens säkerhetsutrustning
- Kedjebroms med kastskydd
- Kommer min hand alltid att aktivera kedjebromsen vid kast?
- Kommer tröghetsaktivering av kedjebromsen alltid ske om ett kast inträffar?
- Kommer kedjebromsen alltid att skydda mig från skador om ett kast inträffar?
- Gasreglagespärr
- Kedjefångare
- Högerhandsskydd
- Avvibreringssystem
- Stoppkontakt
- Ljuddämpare
- Skärutrustning
- Montering av svärd och kedja
- Drivmedel
- Tankning
- Bränslesäkerhet
- Start och stopp
- Före varje användning: (33)
- Allmänna arbetsinstruktioner
- Kastförebyggande åtgärder
- Allmänt
- Förgasarjustering
- Kontroll, underhåll och service av motorsågens säkerhetsutrustning
- Ljuddämpare
- Luftfilter
- Tändstift
- Underhållsschema
- Tekniska data (P02138HV)
- Svärd och kedjekombinationer
- EG-försäkran om överensstämmelse
- Hyvä asiakas!
- Koneessa esiintyvät tunnukset:
- Moottorisahan osat (1)
- Sisältö
- Toimenpiteet ennen uuden moottorisahan käyttöä
- Tärkeää
- Käytä aina tervettä järkeä (2)
- Henkilökohtainen suojavarustus
- Koneen turvalaitteet
- Takapotkusuojuksella varustettu ketjujarru
- Aktivoiko käteni aina ketjujarrun takapotkun yhteydessä?
- Pysäyttääkö automaattinen pysäytystoiminto ketjun aina, jos takapotku tapahtuu?
- Suojaako ketjujarru minua vahingoilta aina, jos takapotku tapahtuu?
- Kaasuliipasimen varmistin
- Ketjusieppo
- Rystyssuojus
- Tärinänvaimennus
- Pysäytin
- Äänenvaimennin
- Terälaite
- Terälevyn ja ketjun asennus
- Polttoaine
- Tankkaus
- Polttoaineturvallisuus
- Käynnistys ja pysäytys
- Aina ennen käyttöä: (33)
- Yleiset työohjeet
- Takapotkua ehkäisevät toimenpiteet
- Yleistä
- Kaasuttimen säätö
- Moottorisahan turvalaitteiden tarkastus, kunnossapito ja huolto
- Äänenvaimennin
- Ilmansuodatin
- Sytytystulppa
- Huoltokaavio
- Tekniset tiedot (P02138HV)
- Terälevy- ja ketjuyhdistelmät
- EY-vaatimustenmukaisuusvakuutus
- Til vore kunder!
- Symboler på maskinen:
- Hvad er hvad på motorsaven? (1)
- Indhold
- Forberedelser, inden en ny motorsav tages i brug
- Vigtigt
- Brug altid din sunde fornuft. (2)
- Personligt beskyttelsesudstyr
- Maskinens sikkerhedsudstyr
- Kædebremse med kastbeskyttelse
- Vil min hånd altid aktivere kædebremsen i tilfælde af kast?
- Vil træghedsaktiveringen af kædebremsen altid forekomme, hvis der indtræder et kast?
- Beskytter kædebremsen mig konstant mod skader i tilfælde af kast?
- Gasreguleringslås
- Kædefanger
- Højrehåndsbeskyttelse
- Vibrationsdæmpningssystem
- Stopkontakt
- Lyddæmper
- Skæreudstyr
- Montering af sværd og kæde
- Drivmiddel
- Tankning
- Brændstofsikkerhed
- Start og stop
- Før hver anvendelse: (33)
- Generelle arbejdsinstruktioner
- Kastforebyggende foranstaltninger
- Generelt
- Karburatorjustering
- Kontrol, vedligeholdelse og service af motorsavens sikkerhedsudstyr
- Lyddæmper
- Luftfilter
- Tændrør
- Vedligeholdelsesskema
- Tekniske data (P02138HV)
- Sværd- og kædekombinationer
- EF-overensstemmelseserklæring
- Kjære kunde
- Symboler på maskinen:
- Hva er hva på motorsagen? (1)
- Innhold
- Tiltak før bruk av en ny motorsag
- Viktig
- Bruk alltid sunn fornuft (2)
- Personlig verneutstyr
- Maskinens sikkerhetsutstyr
- Kjedebrems med kastbeskyttelse
- Vil min hånd alltid aktivere kjedebresmen ved kast?
- Vil treghetsaktivering av kjedebremsen alltid skjer hvis det inntreffer et kast?
- Vil kjedebremsen alltid beskytte meg mot skader hvis et kast inntreffer?
- Gassregulatorsperre
- Kjedefanger
- Høyrehåndsvern
- Avvibreringssystem
- Stoppbryter
- Lyddemper
- Skjæreutstyr
- Montering av sverd og kjede
- Brennstoff
- Fylling av brennstoff
- Brennstoffsikkerhet
- Start og stopp
- Før hver gangs bruk: (33)
- Generelle arbeidsinstruksjoner
- Kastforebyggende tiltak
- Generelt
- Forgasserjustering
- Kontroll, vedlikehold og service på motorsagens sikkerhetsutstyr
- Lyddemper
- Luftfilter
- Tennplugg
- Vedlikeholdsskjema
- Tekniske data (P02138HV)
- Sverd og kjedekombinasjoner
- EF-erklæring om samsvar
- Alla gentile clientela
- I simboli sulla macchina:
- Che cosa c’è nella motosega? (1)
- Indice
- Interventi prima di usare una nuova motosega
- Importante
- Impiegare sempre il buon senso. (2)
- Abbigliamento protettivo
- Dispositivi di sicurezza della macchina
- Freno della catena con protezione anticontraccolpo
- È sufficiente il contatto con la mano per attivare sempre il freno della catena in caso di sobbalzo?
- Il freno della catena è sempre attivato dalla funzione di inerzia in caso di sobbalzo?
- Il freno della catena protegge sempre l’utente da danni in caso di sobbalzo?
- Fermo del gas
- Fermo della catena
- Protezione della mano destra
- Sistema di smorzamento delle vibrazioni
- Interruttore di arresto
- Marmitta
- Attrezzatura di taglio
- Montaggio di lama e catena
- Carburante
- Rifornimento
- Carburante
- Avviamento e arresto
- Ad ogni utilizzo: (33)
- Istruzioni generali di lavoro
- Prevenzione del contraccolpo
- Generalità
- Regolazione del carburatore
- Controllo, manutenzione e servizio dei dispositivi di sicurezza della motosega
- Marmitta
- Filtro dell’aria
- Candela
- Schema di manutenzione
- Caratteristiche tecniche (P02138HV)
- Combinazioni di lama e catena
- Dichiarazione di conformità CE
- Prezado cliente!
- Símbolos na máquina:
- Como se chama, na moto-serra? (1)
- Índice
- Precauções antes de usar a nova moto-serra
- Importante
- Use sempre o seu bom senso (2)
- Equipamento de protecção pessoal
- Equipamento de segurança da máquina
- Travão de corrente com protector anti- retrocesso
- A minha mão activará sempre o travão da corrente na ocorrência de um retrocesso?
- A activação do travão da corrente por inércia funcionará sempre na ocorrência de um retrocesso?
- O travão da corrente proteger-me-á sempre de ferimentos na ocorrência de um retrocesso?
- Bloqueio do acelerador
- Retentor de corrente
- Protector da mão direita
- Sistema anti-vibração
- Contacto de paragem
- Silenciador
- Equipamento de corte
- Montagem da lâmina e corrente
- Combustível
- Abastecimento
- Segurança no manejo de combustível
- Arranque e paragem
- Sempre, antes de usar: (33)
- Instruções gerais de trabalho
- Medidas de prevenção contra retrocessos
- Noções gerais
- Afinação do carburador
- Controlo, manutenção e assistência ao equipamento de segurança da moto-serra
- Silenciador
- Filtro de ar
- Vela de ignição
- Esquema de manutenção
- Especificações técnicas (P02138HV)
- Combinações de lâmina e corrente
- Certificado CE de conformidade
- °Á·ðËÙ¤ ðÂÏ¿ÙË!
- ™‡ÌßÔÏ· ð¿Óˆ ÛÙÔ Ì˯¿ÓËÌ·:
- ÆÈ Â›Ó·È ÙÈ ÛÙÔ ·Ï˘ÛÔðÚ›ÔÓÔ; (1)
- ¶ÂÚȯfiÌÂÓ·
- ¶Ó¤ÚÁÂȘ ðÚÈÓ ı¤ÛÂÙ Û ÏÂÈÙÔ˘ÚÁ›· ¤Ó· ηÈÓÔ‡ÚÁÈÔ ðÚÈfiÓÈ
- ™ËÌ·ÓÙÈÎfi
- ÃÚËÛÈÌÔðÔț٠ð¿ÓÙÔÙ ÎÔÈÓ‹ ÏÔÁÈ΋ (2)
- °ÙÔÌÈÎfi˜ ðÚÔÛٷ٢ÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜
- ¶ÚÔÛٷ٢ÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜ ÙÔ˘ Ì˯·Ó‹Ì·ÙÔ˜
- °Ï˘ÛfiÊÚÂÓÔ Ì ðÚÔÊ˘Ï·ÎÙ‹Ú· ÙÈÓ¿ÁÌ·ÙÔ˜
- £· ÌðÔÚ› ð¿ÓÙÔÙ ÙÔ ¯¤ÚÈ ÌÔ˘ Ó· ÂÓÂÚÁÔðÔÈ› ÙÔ ÊÚ¤ÓÔ ·Ï˘Û›‰·˜ Û ÎψÙÛ‹Ì·Ù·;
- £· ÂÓÂÚÁÔðÔÈÂ›Ù·È ð¿ÓÙÔÙÂ Ë ÏÂÈÙÔ˘ÚÁ›· Ù˘ ·‰Ú¿ÓÂÈ·˜ ÙÔ˘ ÊÚ¤ÓÔ˘ ·Ï˘Û›‰·˜ fiÙ·Ó Ï·Ìß¿ÓÂÈ ¯ÒÚ· ¤Ó· ÎÏÒÙÛËÌ·;
- £· Ì ðÚÔÛٷهÂÈ ð¿ÓÙÔÙ ÙÔ ÊÚ¤ÓÔ ·Ï˘Û›‰·˜ ·ðfi ÙÚ·˘Ì·ÙÈÛÌfi Û ðÂÚ›ðÙˆÛË ðÔ˘ Û˘Ìß› ÎÏÒÙÛËÌ·;
- °ÛÊ¿ÏÂÈ· Áη˙ÈÔ‡
- °ÛÊ¿ÏÂÈ· Û˘ÁÎÚ¿ÙËÛ˘ ·Ï˘Û›‰·˜
- ¶ÚÔÊ˘Ï·ÎÙ‹Ú·˜ ‰ÂÍÈÔ‡ ¯ÂÚÈÔ‡
- ™‡ÛÙËÌ· ·ðfiÛßÂÛ˘ ÎÚ·‰·ÛÌÒÓ
- ¢È·ÎfiðÙ˘ ™ÙÔð
- ™ÈÁ·ÛÙ‹Ú·˜
- ºÔðÙÈÎfi˜ ÂÍÔðÏÈÛÌfi˜
- MÔÓÙ¿ÚÈÛÌ· Ô‰ËÁÔ‡ Î·È ·Ï˘Û›‰·˜
- M›ÁÌ· η˘Û›ÌÔ˘
- °¤ÌÈÛÌ· ÚÂ˙ÂÚßÔ˘¿Ú
- °ÛÊ¿ÏÂÈ· η˘Û›ÌˆÓ
- .ÂΛÓËÌ· Î·È ÛÙ·Ì¿ÙËÌ·
- ¶ÚÈÓ ·ðfi ÔðÔÈ·‰‹ðÔÙ ¯Ú‹ÛË: (33)
- °ÂÓÈΤ˜ Ô‰ËÁ›Â˜ ÂÚÁ·Û›·˜
- ¶Ó¤ÚÁÂȘ ðÚfiÏ˄˘ ÙÈÓ¿ÁÌ·ÙÔ˜
- °ÂÓÈο
- ƒ‡ıÌÈÛË Î·ÚÌðÈÚ·Ù¤Ú
- ¶ÏÂÁ¯Ô˜, Û˘ÓÙ‹ÚËÛË Î·È Û¤ÚßȘ ÙÔ˘ ðÚÔÛٷ٢ÙÈÎÔ‡ ÂÍÔðÏÈÛÌÔ‡ ÙÔ˘ ·Ï˘ÛÔðÚ›ÔÓÔ˘
- ™ÈÁ·ÛÙ‹Ú·˜
- º›ÏÙÚÔ ·¤Ú·
- MðÔ˘˙›
- ¶ÚfiÁÚ·ÌÌ· Û˘ÓÙ‹ÚËÛ˘
- ƯÓÈο ÛÙÔȯ›· (P02138HV)
- ™˘Ó‰˘·ÛÌÔ› Ô‰ËÁÔ‡ Î·È ·Ï˘Û›‰·˜
- ¶K-µÂß·›ˆÛË Û˘Ìʈӛ·˜
- VáÏen˘ zákazníku,
- Symboly vyobrazené na tûlese stroje:
- Co je co na motorové pile? (1)
- Obsah
- Pfied zahájením práce s novou motorovou pilou
- Upozornûní
- VÏdy pouÏívejte zdrav˘ rozum (2)
- Osobní ochranné pomÛcky
- Bezpeãnostní vybavení stroje
- Brzda fietûzu a chrániã levé ruky
- Bude moje ruka aktivovat brzdu fietûzu vÏdy v pfiípadû zpûtného odrazu?
- Spustí se aktivace brzdy fietûzu setrvaãností vÏdy, kdyÏ dojde ke zpûtnému odrazu?
- Ochrání mû brzda fietûzu v pfiípadû zpûtného odrazu vÏdy pfied zranûním?
- Pojistka páãky plynu
- Zachycovaã fietûzu
- Chrániã pravé ruky
- Antivibraãní systém
- Stop spínaã (vypínaã zapalování)
- Tlumiã v˘fuku
- ¤ezn˘ mechanismus
- MontáÏ fiezné li‰ty a fietûzu
- Palivo
- Plnûní paliva
- Bezpeãnost pfii manipulaci s palivem
- Startování a vypínání
- Pfied kaÏd˘m pouÏitím: (33)
- Obecné pracovní pokyny
- Jak zabránit zpûtnému rázu
- V‰eobecnû
- Nastavení karburátoru
- Kontrola a údrÏba bezpeãnostního vybavení motorové pily
- Tlumiã v˘fuku
- Vzduchov˘ filtr
- Zapalovací svíãka
- Schema technické údrÏby
- Technické údaje (P02138HV)
- Kombinace li‰ty a fietûzu
- ES Prohlá‰ení o shodû
- VáÏen˘ zákazník,
- Symboly na stroji:
- âo je ão na reÈazovej píle? (1)
- Obsah
- Pred pouÏitím novej reÈazovej píly
- DôleÏité
- VÏdy sa riaìte zdrav˘m rozumom (2)
- Osobné ochranné prostriedky
- Bezpeãnostné vybavenie stroja
- Brzda reÈaze a predn˘ chrániã ruky
- Spustím brzdu reÈaze rukou vÏdy v prípade spätného nárazu?
- Spustí zotrvaãnosÈ brzdu reÈaze vÏdy v prípade spätného nárazu?
- Zabráni brzda poraneniu vÏdy v prípade spätného nárazu?
- Poistná páãka plynu
- Zachytávaã reÈaze
- Ochrann˘ kryt pravej ruky
- Systém na tlmenie vibrácií
- Vypínaã
- Tlmiã v˘fuku
- Rezacia ãasÈ
- Namontovanie vodiacej li‰ty a reÈaze
- Palivo
- DopæÀanie paliva
- BezpeãnosÈ práce s palivom
- ·tart a stop
- Pred pouÏitím: (33)
- V‰eobecné pracovné pokyny
- Ako sa vyhnúÈ spätnému nárazu
- V‰eobecné
- Nastavenie karburátora
- Kontrola, údrÏba a servis bezpeãnostného vybavenia reÈazovej píly
- Tlmiã v˘fuku
- Vzduchov˘ filter
- Zapaºovacia svieãka
- Plán údrÏby
- Technické údaje (P02138HV)
- Kombinovanie vodiacej li‰ty a reÈaze
- EÚ vyhlásenie o zhode
- Spo‰tovani kupec!
- Simboli na stroju:
- Kaj je kaj na motorni Ïagi? (1)
- Vsebina
- Postopek pred prvo uporabo nove motorne Ïage
- Pomembno
- Zmeraj uporabljajte zdrav razum (2)
- Osebna za‰ãitna oprema
- Varnostna oprema stroja
- Zavora verige s ‰ãitnikom
- Ali bo moja roka v primeru odsunka zmeraj aktivirala zavoro za Ïago?
- Ali se bo zavora zmeraj vztrajnostno aktivirala, ko pride do odsunka?
- Ali bo me zavora za Ïago v primeru odsunka zmeraj varovala pred po‰kodbami?
- Zapora plina
- Lovilec verige
- ·ãitnik desne roke
- Sistem du‰enja tresljajev
- Izklopno stikalo
- Du‰ilec
- Rezila
- MontaÏa meãa in verige
- Pogonsko gorivo
- Toãenje goriva
- Varna uporaba goriva
- VÏig in izklop
- Pred vsako uporabo: (33)
- Splo‰na navodila za delo
- Prepreãevanje odsunka
- Splo‰no
- Nastavitev uplinjaãa
- Kontrola, vzdrÏevanje in servis varnostne opreme motorne Ïage
- Du‰ilec
- Zraãni filter
- Sveãka
- Urnik vzdrÏevanja
- Tehniãni podatki (P02138HV)
- Kombinacije meãa in verige
- ES-Izjava o skladnosti
GENERAL SAFETY PRECAUTIONS
English – 9
1156558-26 Rev.1 2014-01-13
Personal protective equipment
• Approved protective helmet
• Hearing protection
• Protective goggles or a visor
• Gloves with saw protection
• Trousers with saw protection
• Boots with saw protection, steel toe-cap and non-slip
sole
• Always have a first aid kit nearby.
• Fire Extinguisher and Shovel
Generally clothes should be close-fitting without restricting
your freedom of movement.
Machine′′
′′
s safety equipment
In this section the machine’s safety features and their
function are explained. For inspection and maintenance
see instructions under the heading Checking, maintaining
and servicing chain saw safety equipment. See
instructions under the heading, What is what?, to find
where these parts are located on your machine.
The life span of the machine can be reduced and the risk
of accidents can increase if machine maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest service workshop.
Chain brake and front hand guard
Your chain saw is equipped with a chain brake that is
designed to stop the chain if you get a kickback. The chain
brake reduces the risk of accidents, but only you can
prevent them.
Take care when using your saw and make sure the
kickback zone of the bar never touches any object
(45).
• The chain brake (A) can either be activated manually
(by your left hand) or automatically by the inertia release
mechanism.
(3)
• The brake is applied when the front hand guard (B) is
pushed forwards or when the right-hand brake trigger
(E) is pushed up and forwards (240e TrioBrake).
(3)
• This movement activates a spring-loaded mechanism
that tightens the brake band (C) around the engine drive
system (D) (clutch drum).
(4)
• The front hand guard is not designed solely to activate
the chain brake. Another important feature is that it
reduces the risk of your left hand hitting the chain if you
lose grip of the front handle.
• The chain brake must be engaged when the chain saw
is started to prevent the saw chain from rotating.
• Use the chain brake as a ”parking brake” when starting
and when moving over short distances, to reduce the
risk of moving chain accidentally hitting your leg or
anyone or anything close by.
• To release the chain brake pull the front hand guard
backwards, towards the front handle.
• Kickback can be very sudden and violent. Most
kickbacks are minor and do not always activate the
chain brake. If this happens you should hold the chain
saw firmly and not let go.
• The way the chain brake is activated, either manually or
automatically by the inertia release mechanism,
depends on the force of the kickback and the position of
the chain saw in relation to the object that the kickback
zone of the bar strikes.
If you get a violent kickback while the kickback zone of
the bar is farthest away from you the chain brake is
designed to be activated by the inertia in the kickback
direction.
If the kickback is less violent or the kickback zone of the
bar is closer to you the chain brake will be activated
manually by the movement of your left hand.
• In the felling position the left hand is in a position that
makes manual activation of the chain brake impossible.
With this type of grip, that is when the left hand is placed
so that it cannot affect the movement of the front hand
guard, the chain brake can only be activated by the
inertia action.
Will my hand always activate the chain
brake during a kickback?
No. It takes a certain force to move the hand guard forward.
If your hand only lightly touches the front guard or slips
over it, the force may not be enough to trigger the chain
brake. You should also maintain a firm grip of the chain saw
handles while working. If you do and experience a
kickback, your hand may never leave the front handle and
will not activate the chain brake, or the chain brake will only
activate after the saw has swung around a considerable
distance. In such instances, the chain brake might not have
enough time to stop the saw chain before it touches you.
There are also certain positions in which your hand cannot
reach the front hand guard to activate the chain brake; for
example, when the saw chain is held in felling position.
!
WARNING! Most chain saw accidents
happen when the chain touches the
operator. You must use approved
personal protective equipment whenever
you use the machine. Personal
protective equipment cannot eliminate
the risk of injury but it will reduce the
degree of injury if an accident does
happen. Ask your dealer for help in
choosing the right equipment.
IMPORTANT! Sparks can come from the muffler, the
bar and chain or other sources. Always have fire
extinguishing tools available if you should need them.
Help prevent forest fires.
!
WARNING! Never use a machine with
defective safety components. Safety
equipment must be inspected and
maintained. See instructions under the
heading Checking, maintaining and
servicing chain saw safety equipment. If
your machine does not pass all the
checks, take the saw to a servicing
dealer for repair.