Operators Manual

4. Remove drive shaft from drive shaft housing.
I
I
.“
—
5. Check drive shaft for broken wires, twists, or
kinks, replace as necessary.
6. Use a clean cloth to thoroughly wipe old grease
or dirt from drive shaft.
7. Apply a uniform coat of drive shaft lubricant
to entire surface of drive shaft.
8. Replace drive shaft in drive shaft housing.
Turn shaft until it seats in bottom housing.
To check this turn drive shaft by hand.
Trimmer head should rotate.
9. Reassemble drive shaft housing into engine.
Follow steps 1 & 2 in reverse order and tighten
the clutch shroud screws securely.