Operators Manual

~LECTRICALSYSTEMS
SPARK PLUG
REPLACEMENT
~ 1. On 26 LC and 32 LC units the spark plug
is located under the engine cylinder
cover. Remove the 4 four (mm) screws to
gain access to the spark plug.
2. Remove ignition lead from spark plug.
3. Unscrew spark plug, counterclockwise,
using a 3/4” socket.
-
~ 4. The spark plug electrode gap is 0.025 in.
(.635mm).
5. When installing a new plug, tighten it 1/4
turn past finger tight.
6. Replace spark plug lead and top cover for
LC units.
16
I