Operators Manual

CLUTCHSYSTEM
!8
~5. Separate clutch drum housing asssembly
from engine.
= 6. Remove clutch retaining nut
by turning counterclockwise
with a 9/16wrench. With nut
removed, clutch will slide off
crankshaft with the beveled
washer and large flat washer
behind the clutch.
I NOTE:
Do not disassemble clutch hub,
spring and shoe assembly.
NEVER START ENGINE WITH CLUTCH DRUM
HOUSING ASSEMBLY
REMOVED. IF YOU DO, THE CLUTCH SHOES
WILL SEPARATE FROM HUB AND CAUSE
SERIOUS INJURY.
NOTE:
~
If the rope is broken, spring tension may
already be released. However always use cau-
tion and eye protection when performing
starter repairs.