Operators Manual

CLUTCHSYSTEM
STARTER ROPE REMOVAL
I
NEVER START ENGINE WITH
P
.,.
CLUTCH DRUM HOUSING ASSEMBLY
I r ‘.
I
1.
REMOVED. IF YOU DO, THE CLUTCH
SHOES CAN SEPARATE FROM HUB
AND CAUSE SERIOUS INJURY.
Disconnect spark plug wire. On LC models
remove top cover todisconnect sparkplug wire.
For LC models remove switch wires from igni-
1
tion coil at this time.
2.
?
3. Remove the four screws holding clutch drum housing
and starter assembly. On throttle trigger mounted
switches, it will be necessary to disconnect wires from
4.
underside of starter housing assembly.
J
Insert a piston stop
A
part number
5025033-0
A
into the spark plug hole
and tighten.
/
27