Operators Manual

CYLINDER.PISTON&RING
RING REPLACEMENT
1. Refer to piston and cylinder replacement section to
remove cylinder.
2. Once cylinder is removed ring can now be
replaced.
NOTE:
Use caution when replacing the piston
ring. Ring may break if overexpanded.
3.
4.
5.
6.
Remove oldring byex~
your fingers enough to
Expand new ring only enough to slide itover top
of piston into ring groove. Use caution not to
scar piston when installing new piston ring.
The ring is located on the piston by a locating
pin. The ends of the piston ring is cut only to fit
one way. As shown.
To reinstall cylinder reverse steps in piston
and cylinder removal and replacement section
1thru 6.
33