Operators Manual

CRANKCASE
—
14. Remove snap ring next to bearing with
snap ring pliers.
CRANKSHAFT REMOVAL
15. Reinstall clutch nut on crank and tap top of
crankshaft with a soft hammer and remove
crankshaft as shown.
BEARING REPLACEMENT
16. If bearing replacement is necessary, use tool
(# 5025082-01) to remove outer bearing (the
inner bearing will come out with crankshaft),
to remove inner bearing from crankshaft use a
bearing puller.
17. Remove snap ring behind outer bearing if
seal replacement is necessary.
NOTE:
You do not need to remove inner snap ring.
This acts as a locator for reseating seal and
inner bearing.