Operators Manual

SEAL REPLACEMENT
NOTE:
Make sure inner snap ring locator is in place
(between inner bearing and seal). The snap ring
18.
19.
20.
21.
22.
23
locks in its own groove.
Lubricate both bearings with bearing g
Tap in inner bearing against snap ring
with service tool number 5025082-01.
ease.
ocator
Turn case over and tap in new seal against other
side of inner snap ring locator.
Install outer
snap ring that
was removed
in step 17
(located be-
hind outer
bearing).
Tap in outer bearing with
CRANKCAS