Operators Manual

TRIMMERHEAD
PROPER LINE FEED
1. Hold trimmer head as shown.
2. Press lock tab and turn lock ring as shown
on Tap-N-Go II. For Tap-N-Go 111press
lock tabs in and pull straight off.
3.
4.
5.
Remove lock ring and spool.
Thoroughly clean dirt and debris
from all parts.
Carefully check all parts for damage and
replace as needed.
REPLACE ALL DAMAGED PARTS.
TRIMMER HEAD PARTS THAT ARE
CHIPPED OR DAMAGED IN ANY WAY
CAN FLY APART AND
CAUSE SERIOUS INJURY.