Operators Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear Customer,
- Before using a new chain saw
- Important
- Always use common sense
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fitting a spike bumper
- Fuel
- Fuelling
- Fuel safety
- Starting and stopping
- Before use:
- General working instructions
- How to avoid kickback
- Carburettor
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Starter
- Air filter
- Spark plug
- Lubricating the bar tip sprocket
- Needle bearing lubrication
- Adjustment of the oil pump
- Cooling system
- Maintenance schedule
- Technical data
- Guide bar and saw chain combinations
- Saw chain filing and file gauges
- EC-declaration of conformity
English – 37
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/
EC.
Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound
pressure level is a standard deviation of 1 dB (A).
Note 3: Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
le
vels under various working conditions. Reported data for equivalent vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
2
.
3120XP
Engine
Cylinder displacement, cm
3
118,8
Cylinder bore, mm 60
Stroke, mm 42
Idle speed, rpm 2300-2500
Power, kW/ rpm 6,2/9000
Ignition system
Spark plug Champion RCJ 7Y/ NGK BPMR 7A
Electrode gap, mm 0,5
Fuel and lubrication system
Fuel tank capacity, litre/cm
3
1,25/1250
Oil pump capacity at 9,000 rpm, ml/min 30-54
Oil tank capacity, litre/cm
3
0,7/700
Type of oil pump Automatic/Manual for extra oil flow
Weight
Chain saw without bar or chain, empty tanks, kg 10,4
Noise emissions (see note 1)
Sound power level, measured dB(A) 115
Sound power level, guaranteed L
WA
dB(A) 116
Sound levels (see note 2)
Equivalent sound pressure level at the operator’s ear, dB(A) 102
Equivalent vibration levels, a
hveq
(see note 3)
Front handle, m/s
2
6,7
Rear handle, m/s
2
7,8
Chain/bar
Standard bar length, inch/cm 24"/60
Recommended bar lengths, inch/cm 24-42”/60-105
Usable cutting length, inch/cm 23-42”/57-104
Pitch, inch/mm 0,404"/10,26
Thickness of drive links, inch/mm 1,6
Type of drive sprocket/number of teeth Rim/7
Chain speed at 133% of maximum engine power speed, m/s. 26,7