Operators Manual
Table Of Contents
- Symbols
- Contents
- Note the following before starting:
- Dear Customer,
- Important
- Personal protective equipment
- Machine¢s safety equipment
- Cutting equipment
- Fitting the handlebar
- Transport position, handlebar
- Assembling the cutting equipment
- Fitting a blade guard, grass blade and grass cutter
- Fitting the blade guard and saw blade
- Fitting a trimmer guard and Superauto II 1” trimmer head
- Fitting other guards and cutting attachments
- Adjusting the harness and brush cutter
- Standard harness
- Fuel handling
- Fuel
- Check before starting
- Starting and stopping
- General working instructions
- Carburettor
- Muffler
- Cooling system
- Spark plug
- Air filter
- Maintenance schedule
- Technical data
- EC-declaration of conformity (Applies to Europe only)
English – 29
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/
EC. Reported sound power level for the machine has been measured with the original cutting attachment that gives the
highest level. The difference between guaranteed and measured sound power is that the guaranteed sound power also
includes dispersion in the measurement result and the variations between different machines of the same model
according to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard
deviation) of 1 dB (A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
2
.
324Rx
Engine
Cylinder displacement, cm
3
25,0
Cylinder bore, mm 35
Stroke, mm 26
Idle speed, rpm 3100
Recommended max. speed, rpm 11000
Speed of output shaft, rpm 8300
Max. engine output, acc. to ISO 8893, kW/ rpm 0,8 / 7000
Catalytic converter muffler No
Speed-regulated ignition system No
Ignition system
Spark plug NGK CMR5H
Electrode gap, mm 0,6
Fuel and lubrication system
Fuel tank capacity, litre 0,5
Weight
Weight without fuel, cutting attachment and guard, kg 5,5
Noise emissions
(see note 1)
Sound power level, measured dB(A) 105
Sound power level, guaranteed L
WA
dB(A) 106
Noise levels
(see note 2)
Equivalent sound pressure level at the operator’s ear,
measured according to EN ISO 11806 and ISO 22868, dB(A):
Equipped with trimmer head (original) 93
Equipped with grass blade (original) 89
Vibration levels
(see note 3)
Equivalent vibration levels (a
hv,eq
) at handles, measured
according to EN ISO 11806 and ISO 22867, m/s
2
Equipped with trimmer head (original), left/right 2,9/3,1
Equipped with grass blade (original), left/right 2,7/2,2