Operators Manual
Table Of Contents
- Symbols
- Contents
- Note the following before starting:
- Dear Customer,
- Important
- Personal protective equipment
- Machine¢s safety equipment
- Cutting equipment
- Fitting the handlebar
- Transport position, handlebar
- Assembling the cutting equipment
- Fitting a blade guard, grass blade and grass cutter
- Fitting the blade guard and saw blade
- Fitting a trimmer guard and Superauto II 1” trimmer head
- Fitting other guards and cutting attachments
- Adjusting the harness and brush cutter
- Standard harness
- Fuel handling
- Fuel
- Check before starting
- Starting and stopping
- General working instructions
- Carburettor
- Muffler
- Cooling system
- Spark plug
- Air filter
- Maintenance schedule
- Technical data
- EC-declaration of conformity (Applies to Europe only)
30 – English
TECHNICAL DATA
EC-declaration of conformity (Applies to Europe only)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Husqvarna
324Rx
with serial numbers dating from 2009 onwards (the year is clearly stated on the rating plate, followed by the serial
number), comply with the requirements of the COUNCIL’S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. Conformity assessment according
to Annex V.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN ISO 12100-2/A1:2009, CISPR 12:2001, EN ISO 11806:2008
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type
examination on behalf of Husqvarna AB. The certificates are numbered:
SEC/09/2169, 01/164/039
Huskvarna December 29, 2009
Bo Jonsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
Approved accessories Type Cutting attachment guard, Art. no.
Blade shaft thread M10
Grass blade/grass cutter
Grass 255-4 1" (Ø 255 4-teeth) 503 93 42-02
Grass 255-8 1" (Ø 250 8-teeth) 503 93 42-02
Saw blade
Maxi X 200-26 1” (Ø 200 26 teeth) 537 21 71-01
Scarlet 200-22 1" (Ø 200 22 teeth) 537 21 71-01
Plastic blades
Tricut Ø 255 mm (Separate blades have
part number 531 01 77-15)
503 93 42-02 / 503 97 71-01
Tricut Ø 300 mm (Separate blades have
part number 531 01 77-15)
503 93 42-02
Trimmer head
Trimmy Fix (Ø 2.4 mm cord) 503 93 42-02 / 503 97 71-01
Superauto II (Ø 2.4 - 2.7 mm cord) 503 93 42-02 / 503 97 71-01
S35 (Ø 2.4 - 3.0 mm cord) 503 93 42-02 / 503 97 71-01
T25 (Ø 2.0 - 2.7 mm cord) 503 93 42-02 / 503 97 71-01
T35, T35x (Ø 2.4 - 3.0 mm cord) 503 93 42-02 / 503 97 71-01
Support cup Fixed -