User's Manual
Table Of Contents
- Symbols
- Contents
- Note the following before starting:
- Personal protective equipment
- Machine¢s safety equipment
- Checking, maintaining and servicing the machine¢s safety equipment
- General safety precautions
- Safety instructions for using a pruning saw
- Fitting the cutting head
- Fitting the bar and chain
- Adjusting the harness
- Filling with oil
- Assembling and dismantling the two-piece shaft
- Fuel
- Fuelling
- Check before starting
- Starting and stopping
- Carburettor
- Muffler
- Cooling system
- Spark plug
- Air filter
- Bevel gear
- Maintenance schedule
- Technical data
- YOUR WARRANTY RIGHTS AND OBLIGATIONS
- MANUFACTURER¢S WARRANTY COVERAGE
- OWNER¢S WARRANTY RESPONSIBILITIES
- WARRANTY COMMENCEMENT DATE
- LENGTH OF COVERAGE
- WHAT IS COVERED
- WHAT IS NOT COVERED
- HOW TO FILE A CLAIM
- WHERE TO GET WARRANTY SERVICE
- MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS
- EMISSION CONTROL WARRANTY PARTS LIST
- MAINTENANCE STATEMENT
English – 17
ASSEMBLY
Assembling and dismantling the
two-piece shaft
(325P5)
Assembly:
• Make sure the knob is loose.
• Align the cut-out in the upper shaft with the coupling’s lock
plate on the lower shaft. The parts then lock together.
• Tighten the knob.
Dismantling:
Undo the knob (at least three turns).
• Push the knob towards the coupling.
• Carefully twist the upper shaft to unlock it.
• Hold both parts of the shaft and pull the upper shaft out of
the coupling.