User's Manual
Table Of Contents
- Symbols
- Contents
- Note the following before starting:
- Personal protective equipment
- Machine¢s safety equipment
- Checking, maintaining and servicing the machine¢s safety equipment
- General safety precautions
- Safety instructions for using a pruning saw
- Fitting the cutting head
- Fitting the bar and chain
- Adjusting the harness
- Filling with oil
- Assembling and dismantling the two-piece shaft
- Fuel
- Fuelling
- Check before starting
- Starting and stopping
- Carburettor
- Muffler
- Cooling system
- Spark plug
- Air filter
- Bevel gear
- Maintenance schedule
- Technical data
- YOUR WARRANTY RIGHTS AND OBLIGATIONS
- MANUFACTURER¢S WARRANTY COVERAGE
- OWNER¢S WARRANTY RESPONSIBILITIES
- WARRANTY COMMENCEMENT DATE
- LENGTH OF COVERAGE
- WHAT IS COVERED
- WHAT IS NOT COVERED
- HOW TO FILE A CLAIM
- WHERE TO GET WARRANTY SERVICE
- MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS
- EMISSION CONTROL WARRANTY PARTS LIST
- MAINTENANCE STATEMENT
![](/manual/husqvarna/325p5/user-s-manual-english/images/img-24.png)
24 – English
TECHNICAL DATA
Technical data
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
Technical data 323P4 325P5
Engine
Cylinder volume, cu.in/cm
3
1,50/24,5 1,50/24,5
Cylinder bore, inch/mm 1,34/34 1,34/34
Stroke, inch/mm 1,06/27 1,06/27
Recommended max. speed, rpm 11000-11700 11000-11700
Idle speed, rpm 2700 2700
Max. engine output, acc. to ISO 8893 0,9/9000 0,9/9000
Catalytic converter muffler No Yes
Speed-regulated ignition system Yes Yes
Ignition system
Manufacturer/type of ignition system WalbroMB/SEM AM49 WalbroMB/SEM AM49
Spark plug NGK BPMR 7A NGK BPMR 7A
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburettor Zama C1Q Zama C1Q
Fuel tank capacity, US pint/litre 0,02/0,5 0,02/0,5
Chain lubrication system
Oil tank capacity, US pint/litre 0,17 0,17
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 5,0 5,1
Sound levels
(see note 1)
Equivalent noise pressure level at the user’s ear, measured
according to EN/ISO 11680-1, dB(A) 94 92
Equivalent noise power level at the user’s ear, measured
according to EN/ISO 11680-1 and ISO 10884, dB(A) 107 105
Vibration levels
Vibration levels on the handles, measured according to EN/ISO
11680-1, m/s
2
Idle speed, rear/front handles: 1,3/1,9 2,2/2,6
Max. speed, rear/front handles: 4,0/3,1 6,6/7,5