Owner's Manual
GENERAL SAFETY PRECAUTIONS
English – 15
1156088-49 Rev. 1 2013-08-05
Guide bar
Check regularly:
• Whether there are burrs on the edges of the bar.
Remove these with a file if necessary.
• Whether the groove in the bar has become badly
worn. Replace the bar if necessary.
• Whether the tip of the bar is uneven or badly worn. If
a hollow forms on the underside of the bar tip this is
due to running with a slack chain.
• To prolong the life of the bar you should turn it over
daily.
!
WARNING! A faulty cutting attachment
may increase the risk of accidents.