Operators Manual
Table Of Contents
- Symbols
- Contents
- Note the following before starting:
- Dear Customer,
- Important
- Personal protective equipment
- Machine¢s safety equipment
- Fitting the cutting head
- Fitting the bar and chain
- Fitting the impact guard (only some models)
- Telescopic function
- Adjusting the harness
- Fuel safety
- Fuel
- Fueling
- Check before starting
- Filling with oil
- Starting and stopping
- General working instructions
- Carburettor
- Muffler
- Cooling system
- Spark plug
- Air filter
- Gear
- Maintenance schedule
- Technical data
- EC Declaration of Conformity (Applies to Europe only)
28 – English
TECHNICAL DATA
Technical data
Note 1: Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard
deviation) of 1 dB (A).
Note 2: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
2
.
327PT5S
Engine
Cylinder displacement, cm
3
24,5
Cylinder bore, mm 34
Stroke, mm 27
Recommended max. speed, rpm 11500-12500
Idle speed, rpm 2700
Max. engine output, acc. to ISO 8893, kW/ rpm 0,9/8400
Catalytic converter muffler Ye s
Speed-regulated ignition system Ye s
Ignition system
Spark plug NGK BPMR 7A
Electrode gap, mm 0,5
Fuel and lubrication system
Fuel tank capacity, litre 0,5
Oil tank capacity, litre 0,14
Weight
Weight without fuel, oil and cutting equipment, kg 7,3
Noise emissions
Equivalent noise power level at the user’s ear,
measured according to EN/ISO 11680-1, dB(A)
105
Sound levels
(see note 1)
Equivalent sound pressure level at the user’s ear,
measured according to EN/ISO 11680-1, dB(A)
92
Vibration levels
(see note 2)
Vibration levels (a
hw
) at handles, measured according
to EN ISO 11680-1, m/s
2
Short shaft front/rear handle 3.04/3.02
Extended shaft, front/rear handles 2.41/5.36