Operators Manual

CONTENTS
English – 3
Contents Note the f ollowing before
starting:
Please read the oper ator's manual carefully.
KEY TO SYMBOLS
Symbols ................................................................ 2
CONTENTS
Contents ............................................................... 3
Note the following before starting: ........................ 3
INTR ODUCTION
Dear Customer , .................................................... 4
WHA T IS WHAT?
What is what? ....................................................... 5
GENERAL SAFETY PRECA UTIONS
Impor tant .............................................................. 6
Personal protective equipment ............................. 6
Machine ′ s safety equipment ................................. 7
ASSEMBL Y
Fitting the cutting head ......................................... 15
Fitting the bar and chain ....................................... 15
Fitting the impact guard ........................................ 16
Telescopic function ............................................... 16
Adjusting the harness ........................................... 16
FUEL HANDLING
Fuel saf ety ............................................................ 17
Fuel ...................................................................... 17
Fueling .................................................................. 18
ST ARTING AND STOPPING
Chec k before starting ........................................... 19
Filling with oil ........................................................ 19
Starting and stopping ........................................... 19
W ORKING TECHNIQUES
Gener al working instructions ................................ 21
MAINTENANCE
Carb urettor ........................................................... 24
Muffler .................................................................. 25
Cooling system ..................................................... 25
Spark plug ............................................................ 26
Air filter ................................................................. 26
Gear ..................................................................... 26
Maintenance schedule ......................................... 27
TECHNICAL D ATA
T echnical data ...................................................... 28
EC Declaration of Conformity ............................... 29
!
W ARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
W ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use original
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
W ARNING! A pole saw is a dangerous
tool if used carelessly or incorrectly and
can cause serious, even fatal injuries. It
is extremely important that you read and
understand the contents of this
Operator’s Manual.