Operators Manual

18 – English
SAFETY INSTRUCTIONS
!
7 STARTING
Warning! Tree maintenance work with a
chainsaw above ground level, in which
working one-handed can occur, should only
be carried out by specially trained persons.
GENERAL SAFETY PRECAUTIONS
1 Chain saws are designed solely for cutting wood. The only
cutting equipment that can be used with this chain saw are
the combinations of bars and chains recommended in the
”Technical data” section.
2 Never use a chain saw if
you are tired, if you have
drunk alcohol, or if you
are taking medication that
affects your vision, your
judgement or your co-
ordination.
!
Warning!
Never start the saw without first activating
the chain brake!
• Never start a chain saw
unless the bar, chain and
clutch cover are fitted
correctly. (See section on
”Assembly” ).
• Never start a chain saw
indoors. Exhaust fumes can
be dangerous.
• Before starting the saw
make sure there are no
people or animals nearby
who might be put at risk.
• Place the chain saw on the
ground with your right knee
on the rear handle. Activate
the chain brake by pushing
the front hand guard
forward. Grasp the front
handle firmly using your left
hand. Make sure the chain
saw is steady and the chain
is not touching the ground.
Then grasp the starter
handle and pull the starter
cord. Never twist the
starter cord around your
hand.
Prolonged inhalation of exhaust gases from
the engine, chain lubrication oil mist and/or
saw dust can be unhealthy.
!
3 Tree maintenance work with a chainsaw above ground
level, in which working one-handed can occur, should only
be carried out by persons with experience of and training in:
• tree maintenance
• climbing techniques
• safety instructions for climbing
• extra safety equipment, such as harnesses, loops,
straps, ropes, safety hooks and other anti-fall measures
for both the chain saw and operator.
4 Always wear suitable protective clothing. See the section
on
”Personal protective equipment” .
5 Never use a chain saw that has been modified in any way
from its original specification.
6a Never use a chain saw
that is faulty. Carry out
the regular checks,
maintenance and service
routines described in this
manual. Some
maintenance and service
measures must be carried
out by trained specialists.
See the section on
”Maintenance” .
b Before use
1 Check that the chain
brake works correctly and
is not damaged. See the
instructions under the
heading Checking the
chain brake.
2 Check that the throttle
lock works correctly and
is not damaged.
3 Check that the start and
stop switch works
correctly and is not
damaged.
WARNING!
Running an engine in a confined or badly
ventilated area can result in death due to
asphyxiation or carbon monoxide poisoning.
4 Check that all handles are free of oil.
5 Check that the anti vibration system works and is not
damaged.
6 Check that the muffler is securely attached and not
damaged.
7 Check that all parts of the chain saw are tightened correctly
and that they are not damaged or missing.
8 Check that the chain catcher is in place and not damaged.
1
23
4
5
6
7
8
Never start a chain saw unless the bar, chain and all covers are
fitted correctly.
The chain brake must be
engaged when the chain saw
is started. See the instructions
under the heading Start.
Never air drop start the chain
saw. This method is extremely
dangerous, as it is easy to
lose control of the chain saw.
See the instructions under the
heading Start.