Manualshelf

Operators Manual

ManualsBrandsHusqvarna ManualsPower ToolsChainsaw
31323334353637383940
Table Of Contents
36 – English
TECHNICAL DATA
Bar and chain combinations, model 334T
The following combinations are CE approved.
Bar Chain
Length, Pitch, Max. no of teeth
inches inches on tip sprocket
12 3/8 7 T Husqvarna S 36/
Oregon 91 VG
14 3/8 7 T Husqvarna S 36/
Oregon 91 VG
Bar and chain combinations, model
338XPT
The following combinations are CE approved.
Bar Chain
Length, Pitch, Max. no of teeth
inches inches on tip sprocket
12 3/8 9 T Husqvarna S 36/
Oregon 91 VG
14 3/8 9 T Husqvarna S 36/
Oregon 91 VG
16 3/8 9 T Husqvarna S 36/
Oregon 91 VG
Type Inch Inch/mm Inch/mm Degree Degree Degree Inch/mm Inch/cm: dl
91 VG/ 3/8" 0.050"/1,3 5/32" /4,5 60° 30° 0° 0.025"/0,65 12"/30:45 14"/35:50
S 36 16"/40:56
1
5
L
EC-declaration of conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saw
Husqvarna 334T and 338XPT from 2002's serial numbers and onwards (the year is clearly stated in plain text on the type plate
with subsequent serial number), is in conformity with the requirements of the COUNCIL'S DIRECTIVES:
- of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
- of May 3, 1989 ”relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN292-2, CISPR 12:1997, ISO/DIN 11681-2.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The certificate for EC type
examination in accordance with annex VI, has the number: 404/02/905.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. The
certificate has the number: 01/161/042 - 334T, 01/161/043 - 338XPT.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna October 7, 2002
Bo Andréasson, Development manager