Operators Manual

CONTENTS
English – 3
Contents
KEY TO SYMBOLS
Symbols on the machine: ......................................... 2
Symbols in the operator’s manual: ........................... 2
CONTENTS
Contents ................................................................... 3
INTR ODUCTION
Dear Customer , ........................................................ 4
WHA T IS WHAT?
What is what on the chain sa w? ............................... 5
GENERAL SAFETY PRECA UTIONS
Bef ore using a new chain saw .................................. 6
Important .................................................................. 6
Always use common sense ...................................... 6
Personal protective equipment ................................. 7
Machine ′ s safety equipment ..................................... 7
Cutting equipment .................................................... 10
ASSEMBL Y
Fitting the bar and chain ........................................... 17
FUEL HANDLING
Fuel .......................................................................... 19
Fuelling ..................................................................... 20
Fuel safety ................................................................ 20
ST ARTING AND STOPPING
Star ting and stopping ............................................... 21
W ORKING TECHNIQUES
Bef ore use: ............................................................... 23
General working instructions .................................... 23
How to avoid kickback .............................................. 30
MAINTENANCE
Gener al ..................................................................... 31
Carburettor adjustment ............................................. 31
Checking, maintaining and servicing chain saw safety
equipment .................................................................
32
Muffler ...................................................................... 34
Starter ...................................................................... 35
Air filter ..................................................................... 36
Spark plug ................................................................ 36
Lubricating the bar tip sprocket ................................ 36
Needle bearing lubrication ....................................... 37
Adjustment of the oil pump ....................................... 37
Cooling system ......................................................... 37
”Air Injection” centrifugal cleaning ............................ 37
Winter use ................................................................ 38
Maintenance schedule ............................................. 39
TECHNICAL D ATA
T echnical data .......................................................... 40
Bar and chain combinations ..................................... 41
Saw chain filing and file gauges ............................... 41
EC-declaration of conformity .................................... 42