Operators Manual

40 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 7182, is calculated as the time-weighted energy total for noise
pressure levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the time-weighted energy total for vibration
levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
340/340e 345e 350
Engine
Cylinder displacement, cm
3
45,0 45,0 49,4
Cylinder bore, mm 42 42 44
Stroke, mm 32,5 32,5 32,5
Idle speed, rpm 2700 2700 2700
Power, kW/ rpm (Europe) 2,0/9000 2,2/9000 2,3/9000
Power, kW/ rpm (Australia) 2,0/9000 2,2/9000 2,3/9000
Ignition system
Manufacturer of ignition system SEM SEM SEM
Type of ignition system CD CD CD
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5 0,5
Fuel and lubrication system
Manufacturer of carburettor Zama Zama Zama
Carburettor type C3-EL18B/C3-EL32 C3-EL 32 C3-EL 32
Fuel tank capacity, litre 0,5 0,5 0,5
Oil pump capacity at 9,000 rpm, ml/min 9 9 5-12
Oil tank capacity, litre 0,25 0,25 0,25
Type of oil pump Automatic Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, kg 4,7/4,8 4,9 4,8
Noise emissions (see note 1)
Sound power level, measured dB(A) 112 112 114
Sound power level, guaranteed L
WA
dB(A) 113 113 115
Sound levels (see note 2)
Equivalent sound pressure level at operator’s ear,
measured according to relevant international
standards, dB(A) (Europe)
100,5 100,5 102
Equivalent sound pressure level at operator’s ear,
measured according to relevant international
standards, dB(A) (Australia)
100,5 100,5 102
Vibration levels (see note 3)
Front handle, m/s
2
3,1 3,1 2,5
Rear handle, m/s
2
3,5 3,5 2,4
Chain/bar
Standard bar length, inch/cm 13/33 13/33 13/33
Recommended bar lengths, inch/cm 13-18/33-45 13-18/33-45 13-18/33-45
Usable cutting length, inch/cm 12-17/31-43 12-17/31-43 12-17/31-43
Chain speed at max. power, m/sec 17,3 17,3 17,3
Pitch, inch/mm 0,325/8,25 0,325/8,25 0,325/8,25
Thickness of drive links, inch/mm 0,050/1,3 0,050/1,3 0,050/1,3
0,058/1,5 0,058/1,5 0,058/1,5
Number of teeth on drive sprocket 7 7 7