Operators Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Introduction
- Maintenance schedule
- Maintenance and checks of the safety devices on the product
- To do a check of the brake band
- To do a check of the front hand guard and the chain brake activation
- To do a check of the chain brake
- To do a check of the throttle trigger and throttle trigger lockout
- To do a check of the chain catcher
- To do a check of the right hand guard
- To do a check of the vibration damping system
- To do a check of the start/stop switch
- To do a check of the muffler
- Carburetor with adjustment limitations
- Carburetor without adjustment limitations
- To examine if the carburetor is correctly adjusted
- To replace a broken or worn starter rope
- To tighten the recoil spring
- To assemble the starter housing on the product
- To clean the air filter
- To do a check of the spark plug
- To calculate the felling direction
- To sharpen the saw chain
- To adjust the tension of the saw chain
- To do a check of the saw chain lubrication
- To do a check of the rim sprocket
- To lubricate the needle bearing
- To examine the cutting equipment
- To do a check of the guide bar
- To do maintenance on the fuel tank and the chain oil tank
- To adjust the chain oil flow
- Air cleaning system
- To clean the cooling system
- Troubleshooting
- Transportation and storage
- Technical data
- Accessories
- EC Declaration of Conformity
Husqvarna 362 Husqvarna 372 XP Husqvarna 372 XPG
Cylinder displacement, cm
3
65.1 70.7 70.7
Idle speed, rpm 2700 2700 2700
Maximum engine power
acc. to ISO 8893, kW/hp @
rpm
3.4/4.5 @ 9600 3.9/5.2 @ 9600 3.9/5.2 @ 9600
Ignition system
1
Spark plug NGK BPMR 7A/ Champion
PCJ 7Y
NGK BPMR 7A/ Champion
PCJ 7Y
NGK BPMR 7A/ Champion
PCJ 7Y
Electrode gap, mm 0.5 0.5 0.5
Fuel and lubrication system
Fuel tank capacity, liter/cm
3
0.77/700 0.77/700 0.77/700
Oil tank capacity, liter/cm
3
0.42/420 0.42/420 0.42/420
Type of oil pump Automatic Automatic Automatic
Weight
Weight, kg 6.0 6.3 6.5
Noise emissions
2
Sound power level, meas-
ured dB(A)
111 114 114
Sound power level, guaran-
teed L
WA
dB(A)
114 115 115
Sound levels
3
Equivalent sound pressure
level at the operator’s ear,
dB(A)
102.5 103 103
Equivalent vibration levels, a
hveq
4
Front handle, m/s
2
3.6 5.7 5.7
Rear handle, m/s
2
3.5 8.0 8.0
Saw chain/guide bar
Type of drive sprocket/
number of teeth
Rim/7 Rim/7 Rim/7
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
2
Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive
2000/14/EC.
3
Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent
sound pressure level is a standard deviation of 1 dB (A).
4
Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s
2
.
593 - 001 - 20.01.2020 35