Operators Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear Customer,
- Before using a new chain saw
- Important
- Always use common sense
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inetria activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fuelling
- Fuel safety
- Starting and stopping
- Before use:
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Starter
- Air filter
- Spark plug
- Lubricating the bar tip sprocket
- Needle bearing lubrication
- Cooling system
- ”Air Injection” centrifugal cleaning
- Winter use
- Maintenance schedule
- Technical data
- Bar and chain combinations
- Saw chain filing and file gauges
- EC-declaration of conformity
CONTENTS
English
–
3
115 10 82-26 Re
v
.2 2008-06-03
Contents
KEY
TO SYMBOLS
Symbols on the machine:
..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents
............................................................... 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what on the chain sa
w? ........................... 5
GENERAL SAFETY PRECA
UTIONS
Bef
ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 7
Personal protective equipment ............................. 7
Machine
′
s safety equipment ................................. 7
Cutting equipment ................................................ 11
ASSEMBL
Y
Fitting the bar and chain
....................................... 17
FUEL HANDLING
Fuel
...................................................................... 19
Fuelling ................................................................. 20
Fuel safety ............................................................ 20
ST
ARTING AND STOPPING
Star
ting and stopping ........................................... 21
W
ORKING TECHNIQUES
Bef
ore use: ........................................................... 23
General working instructions ................................ 23
How to avoid kickback .......................................... 30
MAINTENANCE
Gener
al ................................................................. 31
Carburettor adjustment ......................................... 31
Checking, maintaining and servicing chain saw
safety equipment ..................................................
31
Muffler .................................................................. 33
Starter .................................................................. 34
Air filter ................................................................. 35
Spark plug ............................................................ 36
Lubricating the bar tip sprocket ............................ 36
Needle bearing lubrication ................................... 36
Cooling system ..................................................... 36
”Air Injection” centrifugal cleaning ........................ 37
Winter use ............................................................ 37
Maintenance schedule ......................................... 38
TECHNICAL D
ATA
T
echnical data ...................................................... 39
Bar and chain combinations ................................. 40
Saw chain filing and file gauges ........................... 40
EC-declaration of conformity ................................ 41