Operators Manual

English – 33
TECHNICAL DATA
EC Declaration of Conformity
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Husqvarna 435 II, 435e II, 440 II and 440e II from 2016’s serial numbers and onwards (the year
is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements
of the COUNCIL’S DIRECTIVES:
- of May 17, 2006 ”relating to machinery” 2006/42/EC.
- of February 26, 2014 ”relating to electromagnetic compatibility” 2014/30/EU.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
- of June 8, 2011 ”on the restriction of the use of certain hazardous substances in electrical and electronic equipment”
2011/65/EU.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN ISO 12100-2011, ISO 14982:2009, EN ISO 11681-1:2011, EN 50581:2012.
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive’s (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex IX, have the numbers: 0404/09/2012 - 435 II, 435e II, 440 II, 440e II.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity with
annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. The
certificates have the numbers: 01/161/075 - 435 II, 435e II, 01/161/074 - 440 II, 440e II.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna March 30, 2016
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)