Operators Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear Customer,
- Before using a new chain saw
- Important
- Always use common sense (2)
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle trigger lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fueling
- Fuel safety
- Starting and stopping
- Before use: (61)
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Starter housing
- Air filter
- Spark plug
- Needle bearing lubrication
- Cooling system
- ”Air Injection” centrifugal cleaning
- Winter use
- Maintenance schedule
- Technical data
- Recommended cutting equipment
- Filing equipment and filing angles
- EC Declaration of Conformity
- Symboles sur la machine:
- Symboles dans le manuel:
- Sommaire
- Cher client,
- Mesures à prendre avant de mettre en usage une tronçonneuse neuve
- Important!
- Utilisez toujours votre bon sens (2)
- Équipement de protection personnelle
- Équipement de sécurité de la machine
- Frein de chaîne avec arceau protecteur
- Ma main active-t-elle toujours le frein de chaîne en cas de rebond?
- L’inertie du frein de chaîne est-elle toujours activée en cas de rebond?
- Le frein de chaîne me protège-t-il toujours des blessures en cas de rebond?
- Blocage de l’accélération
- Capteur de chaîne
- Protection de la main droite
- Système anti-vibrations
- Bouton d’arrêt
- Silencieux
- Équipement de coupe
- Montage du guide-chaîne et de la chaîne
- Carburant
- Remplissage de carburant
- Sécurité carburant
- Démarrage et arrêt
- Avant chaque utilisation: (61)
- Méthodes de travail
- Mesures anti-rebond
- Généralités
- Réglage du carburateur
- Contrôle, maintenance et entretien des équipements de sécurité de la tronçonneuse
- Silencieux
- Lanceur
- Filtre à air
- Bougie
- Graissage du roulement à aiguilles
- Système de refroidissement
- Épuration centrifuge ”Air Injection”
- Utilisation hivernale
- Schéma d’entretien
- Caractéristiques techniques
- Équipement de coupe recommandé
- Équipement et angles d’affûtage
- Déclaration CE de conformité
- Símbolos en la máquina:
- Símbolos en el manual de instrucciones:
- Índice
- Apreciado cliente:
- Medidas a tomar antes de utilizar una motosierra nueva
- Importante
- Emplee siempre el sentido común (2)
- Equipo de protección personal
- Equipo de seguridad de la máquina
- Freno de cadena con protección contra reculadas
- ¿Activará siempre mi mano el freno de cadena en caso de reculada?
- ¿Se activa siempre por inercia el freno de cadena cuando se produce una reculada?
- ¿Me protegerá siempre el freno de cadena contra daños si se produce una reculada?
- Fiador del acelerador
- Captor de cadena
- Protección de la mano derecha
- Sistema amortiguador de vibraciones
- Botón de parada
- Silenciador
- Equipo de corte
- Montaje de la espada y la cadena
- Carburante
- Repostaje
- Seguridad en el uso del combustible
- Arranque y parada
- Antes de utilizar la máquina: (61)
- Instrucciones generales de trabajo
- Medidas preventivas de las reculadas
- Generalidades
- Ajuste del carburador
- Control, mantenimiento y servicio del equipo de seguridad de la motosierra
- Silenciador
- Mecanismo de arranque
- Filtro de aire
- Bujía
- Lubricación del cojinete de agujas
- Sistema refrigerante
- Depuración centrífuga ”Air Injection”
- Utilización en invierno
- Programa de mantenimiento
- Datos técnicos
- Equipo de corte recomendado
- Equipo de afilado y ángulos de afilado
- Declaración CE de conformidad
- Símbolos na máquina:
- Símbolos nas instruções para o uso:
- Índice
- Prezado cliente!
- Precauções antes de usar a nova moto-serra
- Importante
- Use sempre o seu bom senso (2)
- Equipamento de protecção pessoal
- Equipamento de segurança da máquina
- Travão de corrente com protector anti- retrocesso
- A minha mão activará sempre o travão da corrente na ocorrência de um retrocesso?
- A activação do travão da corrente por inércia funcionará sempre na ocorrência de um retrocesso?
- O travão da corrente proteger-me-á sempre de ferimentos na ocorrência de um retrocesso?
- Bloqueio do acelerador
- Retentor de corrente
- Protector da mão direita
- Sistema anti-vibração
- Contacto de paragem
- Silenciador
- Equipamento de corte
- Montagem da lâmina e corrente
- Combustível
- Abastecimento
- Segurança no manejo de combustível
- Arranque e paragem
- Sempre, antes de usar: (61)
- Instruções gerais de trabalho
- Medidas de prevenção contra retrocessos
- Noções gerais
- Afinação do carburador
- Controlo, manutenção e assistência ao equipamento de segurança da moto-serra
- Silenciador
- Dispositivo de arranque
- Filtro de ar
- Vela de ignição
- Lubrificação do rolamento de agulhas
- Sistema de arrefecimento
- Purificação centrífuga ”Air injection”
- Uso durante o inverno
- Esquema de manutenção
- Especificações técnicas
- Equipamento de corte recomendado
- Equipamento e ângulos de afiação
- Certificado CE de conformidade
GENERAL SAFETY PRECA
UTIONS
English
– 11
1157680-38 Rev.4 2018-10-15
Always use common sense (2)
It is not possible to cover every conceivable situation you
can face when using a chain saw. Always exercise care
and use your common sense. Avoid all situations which
you consider to be beyond your capability. If you still feel
uncertain about operating procedures after reading these
instructions, you should consult an expert before
continuing. Do not hesitate to contact your dealer or us if
you have any questions about the use of the chain saw.
We will willingly be of service and provide you with advice
as well as help you to use your chain saw both efficiently
and safely. Attend a training course in chain saw usage if
possible. Your dealer, forestry school or your library can
provide information about which training materials and
courses are available. Work is constantly in progress to
improve the design and technology - improvements that
increase your safety and efficiency. Visit your dealer
regularly to see whether you can benefit from new
features that have been introduced.
Personal protective equipment
• Approved protective helmet
• Hearing protection
• Protective goggles or a visor
• Gloves with saw protection
• Trousers with saw protection
• Boots with saw protection, steel toe-cap and non-slip
sole
• Always have a first aid kit nearby.
• Fire Extinguisher and Shovel
Generally clothes should be close-fitting without
restricting your freedom of movement.
Machine′s safety equipment
In this section the machine’s safety features and their
function are explained. For inspection and maintenance
see instructions under the heading Checking, maintaining
and servicing chain saw safety equipment. See
instructions under the heading, What is what?, to find
where these parts are located on your machine.
The life span of the machine can be reduced and the risk
of accidents can increase if machine maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest service workshop.
Chain brake and front hand guard
Your chain saw is equipped with a chain brake that is
designed to stop the chain if you get a kickback. The chain
brake reduces the risk of accidents, but only you can
prevent them.
(3)
Take care when using your saw and make sure the
kickback zone of the bar never touches any object.
(4)
• The chain brake (A) can either be activated manually
(by your left hand) or automatically by the inertia
release mechanism.
(5)
• The brake is applied when the front hand guard (B) is
pushed forwards.
(5)
• This movement activates a spring-loaded mechanism
that tightens the brake band (C) around the engine
drive system (D) (clutch drum).
(6)
• The front hand guard is not designed solely to activate
the chain brake. Another important feature is that it
reduces the risk of your left hand hitting the chain if
you lose grip of the front handle.
• The chain brake must be engaged when the chain
saw is started to prevent the saw chain from rotating.
(55)
• Use the chain brake as a ”parking brake” when
starting and when moving over short distances, to
reduce the risk of moving chain accidentally hitting
your leg or anyone or anything close by. Do not leave
the chain saw switched on with the chain brake
activated for long periods. The chain saw can become
very hot.
• The chain brake is released by moving the front hand
guard marked ”PULL BACK TO RESET” back,
towards the front handle.
• Kickback can be very sudden and violent. Most
kickbacks are minor and do not always activate the
chain brake. If this happens you should hold the chain
saw firmly and not let go.
• The way the chain brake is activated, either manually
or automatically by the inertia release mechanism,
!
WARNING! Most chain saw accidents
happen when the chain touches the
operator. You must use approved
personal protective equipment whenever
you use the machine. Personal protective
equipment cannot eliminate the risk of
injury but it will reduce the degree of
injury if an accident does happen. Ask
your dealer for help in choosing the right
equipment.
IMPORTANT! Sparks can come from the muffler, the bar
and chain or other sources. Always have fire
extinguishing tools available if you should need them.
Help prevent forest fires.
!
WARNING! Never use a machine with
defective safety components. Safety
equipment must be inspected and
maintained. See instructions under the
heading Checking, maintaining and
servicing chain saw safety equipment. If
your machine does not pass all the
checks, take the saw to a servicing
dealer for repair.