Operators Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Operation
- Maintenance
- Transportation, storage and disposal
- Technical data
- EC Declaration of Conformity
- Содержание
- Въведение
- Безопасност
- Операция
- Поддръжка
- Въведение
- График за техническо обслужване
- Регулиране на оборотите на празния ход
- За почистване на системата за охлаждане
- За проверка на запалителната свещ
- За почистване на въздушния филтър
- За да нанесете масло върху порестия въздушен филтър
- За смазване на корпуса на скоростната кутия
- За почистване и смазване на ножовете
- За проверка на ножовете
- Транспортиране, съхранение и изхвърляне
- Технически данни
- Декларация за съответствие на ЕО
- Obsah
- Úvod
- Bezpečnost
- Provoz
- Údržba
- Přeprava, skladování a likvidace
- Technické údaje
- ES Prohlášení o shodě
- Indhold
- Indledning
- Sikkerhed
- Drift
- Vedligeholdelse
- Transport, opbevaring og bortskaffelse
- Tekniske data
- EU-overensstemmelseserklæring
- Inhalt
- Einleitung
- Sicherheit
- Betrieb
- Wartung
- Einleitung
- Wartungsplan
- So stellen Sie die Leerlaufdrehzahl ein
- So reinigen Sie das Kühlsystem
- So überprüfen Sie die Zündkerze
- So reinigen Sie den Luftfilter
- So tragen Sie Öl auf den Schaumluftfilter auf
- So schmieren Sie das Getriebegehäuse
- So reinigen und schmieren Sie die Klingen
- So überprüfen Sie die Klingen
- Transport, Lagerung und Entsorgung
- Technische Angaben
- EG-Konformitätserklärung
- Περιεχόμενα
- Εισαγωγή
- Ασφάλεια
- Λειτουργία
- Συντήρηση
- Μεταφορά, αποθήκευση και απόρριψη
- Τεχνικά στοιχεία
- Δήλωση Συμμόρφωσης ΕΚ
- Contenido
- Introducción
- Seguridad
- Funcionamiento
- Mantenimiento
- Introducción
- Programa de mantenimiento
- Para ajustar el régimen de ralentí
- Para limpiar el sistema de refrigeración
- Para examinar la bujía
- Limpieza del filtro de aire
- Aplicación de aceite al filtro de aire de espuma
- Para lubricar la caja de engranajes
- Limpieza y lubricación de las cuchillas
- Examinar las cuchillas
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Declaración de conformidad CE
- Sisukord
- Sissejuhatus
- Ohutus
- Töö
- Hooldamine
- Transportimine, hoiulepanek ja utiliseerimine
- Tehnilised andmed
- EÜ vastavusdeklaratsioon
- Sisältö
- Johdanto
- Turvallisuus
- Käyttö
- Huolto
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- EY-vaatimustenmukaisuusvakuutus
- Sommaire
- Introduction
- Sécurité
- Utilisation
- Entretien
- Introduction
- Calendrier de maintenance
- Pour régler le régime de ralenti
- Pour nettoyer le circuit de refroidissement
- Pour vérifier la bougie
- Pour nettoyer le filtre à air
- Pour appliquer de l'huile sur le filtre à air en mousse
- Pour lubrifier le carter d'engrenage
- Pour nettoyer et lubrifier les lames
- Pour examiner les lames
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Déclaration de conformité CE
- Sadržaj
- Uvod
- Sigurnost
- Rad
- Održavanje
- Prijevoz, spremanje i zbrinjavanje
- Tehnički podaci
- Izjava o sukladnosti EC
- TARTALOMJEGYZÉK
- Bevezető
- Biztonság
- Üzemeltetés
- Karbantartás
- Szállítás, tárolás és ártalmatlanítás
- Műszaki adatok
- EK megfelelőségi nyilatkozat
- Sommario
- Introduzione
- Sicurezza
- Utilizzo
- Manutenzione
- Introduzione
- Programma di manutenzione
- Regolazione del regime minimo
- Pulizia del sistema di raffreddamento
- Per esaminare la candela
- Pulizia del filtro dell'aria
- Applicazione dell'olio sul filtro dell'aria in espanso
- Lubrificazione della scatola ingranaggi
- Pulizia e lubrificazione delle lame
- Ispezione delle lame
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Dichiarazione di conformità CE
- TURINYS
- Įvadas
- Sauga
- Naudojimas
- Techninė priežiūra
- Transportavimas, saugojimas ir utilizavimas
- Techniniai duomenys
- EB atitikties deklaracija
- Saturs
- Ievads
- Drošība
- Lietošana
- Apkope
- Pārvadāšana, glabāšana un utilizēšana
- Tehniskie dati
- EK atbilstības deklarācija
- Inhoud
- Inleiding
- Veiligheid
- Werking
- Onderhoud
- Vervoer, opslag en verwerking
- Technische gegevens
- EG verklaring van overeenstemming
- INNHOLD
- Innledning
- Sikkerhet
- Drift
- Vedlikehold
- Transport, oppbevaring og avhending
- Tekniske data
- EF-samsvarserklæring
- SPIS TREŚCI
- Wstęp
- Bezpieczeństwo
- Przeznaczenie
- Przegląd
- Transport, przechowywanie i utylizacja
- Dane techniczne
- Deklaracja zgodności WE
- ÍNDICE
- Introdução
- Segurança
- Funcionamento
- Manutenção
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Declaração CE de conformidade
- CUPRINS
- Introducere
- Siguranţă
- Funcţionarea
- Întreținerea
- Transportul, depozitarea şi eliminarea
- Date tehnice
- Declarație de conformitate CE
- Содержание
- Введение
- Безопасность
- Эксплуатация
- Техническое обслуживание
- Транспортировка, хранение и утилизация
- Технические данные
- Декларация соответствия ЕС
- Obsah
- Úvod
- Bezpečnosť
- Prevádzka
- Údržba
- Preprava, skladovanie a likvidácia
- Technické údaje
- ES vyhlásenie o zhode
- VSEBINA
- Uvod
- Varnost
- Delovanje
- Vzdrževanje
- Transport skladiščenje in odstranitev
- Tehnični podatki
- Izjava ES o skladnosti
- Innehåll
- Introduktion
- Säkerhet
- Drift
- Underhåll
- Transport, förvaring och kassering
- Tekniska data
- EG‐försäkran om överensstämmelse
- İçindekiler
- Giriş
- Güvenlik
- Kullanım
- Bakım
- Taşıma, depolama ve atma
- Teknik veriler
- AT Uyumluluk Bildirimi
CAUTION: Small errors can influence the
ratio of the mixture drastically when you mix
small quantities of fuel. Measure the quantity
of oil carefully and make sure that you get
the correct mixture.
1. Fill half the quantity of gasoline in a clean container
for fuel.
2. Add the full quantity of oil.
3. Shake the fuel mixture.
4. Add the remaining quantity of gasoline to the
container.
5. Carefully shake the fuel mixture.
CAUTION: Do not mix fuel for more than 1
month at a time.
To fill the fuel tank
WARNING: Obey the procedure that follows
for your safety.
1. Stop the engine and let the engine become cool.
2. Clean the area around the fuel tank cap.
3. Shake the container and make sure that the fuel is
fully mixed.
4. Remove the fuel tank cap slowly to release the
pressure.
5. Fill the fuel tank.
CAUTION: Make sure that there is not
too much fuel in the fuel tank. The fuel
expands when it becomes hot.
6. Tighten the fuel tank cap carefully.
7. Clean fuel spillage on and around the product.
8. Move the product 3 m/10 ft or more away from the
refueling area and fuel source before you start the
engine.
Note: To see where the fuel tank is on your product,
refer to
Product overview on page 2
.
To install the leaf catcher and the blade
tip protection
1. Remove the outer 8 nuts from the bolts on the blade.
2. Put the leaf catcher on the 8 bolts. Refer to
Product
overview on page 2
, to see where the leaf catcher is
on the product.
3. Put the blade tip protection on the 2 bolts on the tip
of the blade.
4. Install the 8 nuts to the bolts.
5. Torque the nuts to 7 Nm.
To start the product with a cold engine
1. Pull the choke control to choke position.
2. Push the air purge bulb approximately 6 times or
until the bulb starts to fill with fuel. It is not necessary
to fill the air purge bulb fully.
3. Hold the body of the product on the ground with your
left hand. Do not step on the product.
4. Pull the starter rope handle slowly with your right
hand until you feel some resistance, then pull the
starter rope handle quickly and with force.
WARNING:
Do not wind the starter rope
around your hand.
CAUTION: Do not pull the starter rope to
full extension and do not let go of the
starter rope handle.
8 905 - 001 - 05.02.2020