Operation Manual

ASSEMBLY
English
–
11
Blow pipe
The blower tube has a pegged slot mounting system to
the unit.
• To install or remove the blower tube, the tube clamp
screw must be loosen.
• Align slot in the blower air outlet with the raised rib on
the intermediate tube and insert tube until the holes in
the tube and housing align.
• Re-tighten the tube clamp bolt.
1 Tube clamp screw
2 Intermediate tube
3 Round nozzle
4 High speed nozzle
3
2
4
1
H1156688-26,525BX,GB.fm Page 11 Thursday, December 11, 2014 3:34 PM