Operators Manual
KEY TO SYMBOLS
2 – English
Symbols
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Hearing protection
• Approved eye protection
• A breathing mask should be used
when there is a risk of dust.
Gloves should be worn when necessary.
This product is in accordance with
applicable EC directives.
The blower can forcibly throw
objects that can bounce back.
This can result in serious eye
injuries if the recommended
safety equipment is not used.
The blower operator
must ensure that no
people or animals come
closer than 15 metres.
When several operators
are working at the same site a safety distance of at least
15 metres must be in effect.
Air purge
Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specied in the Technical
data chapter and on the label.
Other symbols/decals on the machine refer to special
certication requirements for certain markets.
The engine is switched off by moving the
stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug cap must be
removed from the spark plug when assembling, checking
and/or performing maintenance.
Regular cleaning is required.
Visual check.
Refuelling.
Choke lever in ”open position”.
Choke lever in ”closed position”.
H1156688-38,525BX,GB_1.fm Page 2 Tuesday, April 19, 2016 10:37 AM