Operators Manual

English - 13

Engine special tools

4.1 Special tools

Pos Description Used for Order No.

Torx wrench General disassembly / assembly tasks

578 28 90-01

Air gap tool (t 0.3mm) Adjust the air gap when installing the

ignition module

514 22 10-01

Stopper (14 mm use) Fix piston in place when installing /

removing clutch, rotor and starter pulley.

514 24 39-01

Puller assembly Removing the rotor (removal bolt M6) 510 13 89-01

Rod assembly Installing / removing the piston pin 513 18 12-01

Puller Installing / removing the recoil pulley 581 96 55-01

Plier Remove Clutch drum clip 515 41 95-01

Rod Remove clutch drum 581 44 10-01

9 Guide Installing clutch drum clip 581 44 11-01

10 Guide pusher Installing clutch drum clip 515 41 98-01

11 Hook for fuel filter Withdrawing the fuel filter 502 50 83-01

12 Adjustment screwdri-

ver

Adjustment of the carburettor 530 03 55-60

13 Assembly kit, piston Assembling the piston 502 50 70-01

14 Revolution counter Engine speed meter 502 71 14-01

Spark plug Testing spark plug 502 71 14-01

Pliers Ignition cable 502 50 06-01

Pressure test tool Pressure test in fuel system 531 03 06-23

3 4

Removal bolt