Operators Manual

22 - English
Safety equipment
6.7 Assembling the throttle
Put all details in the left half of the handle. Make
sure that the spring is correct fitted. Make sure
that all cables is fitted in the handle and will not be
clamped.
Assemble the throttle trigger lock (A) and the anti
vibration element (B).
Fit the spring (C) and the throttle lever.
Fit the clamping sleeve (D).
Carefully put the handle together, make sure the
anti vibration element is not lost.
Fasten the 5 screws (E) that holding the handle in
place. Fasten the screw (F) holding the shaft.
6.8 Assembling the throttle
Put all details in the left half of the handle. Make
sure that the spring (A) and the throttle trigger (B) is
correct fitted.
Make sure that all cables is fitted in the handle and
will not be clamped.
Fasten the handle with the screws but do not tigh-
ten until the handle is on place on the handlebar.
B
C
A
B
B
D
F
E
A
B