Operators Manual

24 - English
Startapparat
7 Repair instructions
Content
7.1 Dismantling, recoil pulley. ...............................................................................................25
7.2 Assembing, recoil pulley. ................................................................................................25
7.3 Replacing starter pawls ..................................................................................................27
7.4 Checking the ignition spark ............................................................................................28
7.5 Dismantling, shaft and clutch housing from engine body ...............................................30
7.6 Assembing, shaft and clutch housing from engine body ................................................30
7.7 Adjust the ignition module ..............................................................................................31
7.8 Fuel system ....................................................................................................................32
7.9 Dismantling, air filter ....................................................................................................... 32
7.10 Tank venting ...................................................................................................................32
7.11 Replacing, fuel filter ........................................................................................................ 33
7.12 Fuel pump ......................................................................................................................33
7.13 Carburator ......................................................................................................................33
7.14 Dismantling, carburettor .................................................................................................35
7.15 Assembling, carburettor .................................................................................................38
7.16 Carburettor settings ........................................................................................................40
7.17 Dismantling, centrifugal clutch, flywheel, ignition module ..............................................42
7.18 Assembling, centrifugal clutch, flywheel, ignition module ...............................................44
7.19 Dismantling, cylinder and piston.....................................................................................45
7.20 Cleaning and inspection .................................................................................................47
7.21 Assembling, cylinder and piston .....................................................................................54
7.22 Dismantling, crankshaft and crankcase .......................................................................... 55
7.23 Assembling, crankshaft and crankcase ..........................................................................57
7.24 Clutch drum and drive shaft ...........................................................................................59
7.25 Dismantling and assembling, clutch drum and drive shaft .............................................59
7.26 Bevel gear ......................................................................................................................62
7.27 Dismantling, Bevel gear..................................................................................................62
7.28 Assembling, bevel gear ..................................................................................................64