Operators Manual
Table Of Contents
- Introduction
- Safety
- Assembly
- Operation
- Introduction
- To do a function check before you use the product
- To connect the battery charger
- Backpack battery (530iBX)
- To charge the battery
- To connect the battery to the product
- To connect the backpack battery to the product
- To start the product
- To start the product
- To stop the product
- To stop product and the backpack battery
- To set the optimal airflow for your work
- To temporarily increase the airflow
- Maintenance
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- Accessories
- EC Declaration of Conformity
Keypad Possible faults Possible action
Red error LED is lit The product needs servicing. Contact your servicing agent.
Battery
LED display Possible faults Possible action
Green LED flashing Low battery voltage. Charge the battery.
Red error LED flashing The battery is discharged. Charge the battery.
Temperature deviation. Use the battery in tempereatures be-
tween -10°C (14°F) and 40°C
(104°F).
Over voltage. Check that the mains voltage corre-
sponds with that stated on the rating
plate on the product.
Remove the battery from the battery
charger.
Red error LED is lit Cell difference is to much (1V). Contact your servicing agent.
Backpack battery
See the backpack battery manual for troubleshooting of
the backpack battery.
Battery charger
LED display Possible faults Possible action
Red error LED flashing Temperature deviation. Use the battery charger in surround-
ings where tempereatures are be-
tween 5 °C (41 °F) and 40 °C (104
°F).
Red error LED is lit Contact your service agent.
Transportation, storage and disposal
Transportation and storage
• The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
• Obey the special requirement on package and labels
for commercial transportations, including by third
parties and forwarding agents.
• Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
• Use tape on open contacts when you put the battery
in a package. Put the battery in the package tightly
to prevent movement.
• Remove the battery for storage or transportation.
• Put the battery and the battery charger in a space
that is dry and free from moisture and frost.
• Do not keep the battery in an area where static
electricity can occur. Do not keep the battery in a
metal box.
• Put the battery in storage where the temperature is
between 5 °C (41 °F) and 25 °C (77 °F) and away
from open sunlight.
519 - 002 - 30.05.2018 13