MSDS

Safety Data Sheet
VAL KVC118M FA16
Version: 1.0, Date of issue: 2015-12-04, p. 6 of 13
Cal/OSHA: 150 ppm, (ST) 200 ppm PEL inhalation; NIOSH: 150 ppm, (ST) 200 ppm REL inhalation; OSHA:
150 ppm PEL inhalation; 710 mg/m3 PEL inhalation
CAS: 1330-20-7
Xylenes (o-, m-, p-isomers)
Cal/OSHA: 100 ppm, (ST) 150 ppm, (C) 300 ppm PEL inhalation; NIOSH: 100 ppm, (ST) 150 ppm REL
inhalation; OSHA: 100 ppm PEL inhalation; 435 mg/m3 PEL inhalation
CAS: 22464-99-9
Zirconium ethyl hexoate
ACGIH: 10 mg/m3 STEL; 5 mg/m3 TWA; NIOSH: 10 mg/m3 STEL; 5 mg/m3 excep Ziroconium tetrachloride
TWA; OSHA: 5 mg/m3 TWA
CAS: 67-64-1
Acetone
Cal/OSHA: 500 ppm, (ST) 750 ppm, (C) 3000 ppm PEL inhalation; NIOSH: 250 ppm REL inhalation; OSHA:
1000 ppm PEL inhalation; 2400 mg/m3 PEL inhalation
CAS: 71-36-3
n-Butyl alcohol
Cal/OSHA: (C) 50 ppm PEL inhalation; NIOSH: (C) 50 ppm REL inhalation; OSHA: 100 ppm PEL inhalation;
300 mg/m3 PEL inhalation
CAS: 8052-41-3
Stoddard solvent
ACGIH: 100 ppm TWA; NIOSH: 350 mg/m3 TWA; OSHA: 500 ppm TWA; 2900 mg/m3 TWA
Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.
Distribution, Workplace and Household Settings: Ensure adequate ventilation. Product Manufacturing Plant (needed
at Product-Producing Plant ONLY): Where reasonably practicable this should be achieved by the use of local
exhaust ventilation and good general extraction.
Individual protection measures, such as personal protective equipment (PPE)
Eye/face protection
Eye/Face Protection: None required with normal household use. Industrial Setting: For splash protection, use
chemical goggles. Eye wash fountain is recommended.
Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU).
Distribution, Workplace and Household Settings: No special protective equipment required. Product Manufacturing
Plant (needed at Product-Producing Plant ONLY): Use appropriate eye protection.
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching
glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in
accordance with applicable laws and good laboratory practices. Wash and dry hands.
Body protection
Skin Protection: None required with normal household use. Industrial Setting: Protective gloves (for hands) and
protective clothing are required where repeated or prolonged skin contact may occur.
Impervious clothing, Flame retardant antistatic protective clothing., The type of protective equipment must be
selected according to the concentration and amount of the dangerous substance at the specific workplace.