Operators Manual
Table Of Contents
- Introduction
- Safety
- Assembly
- Operation
- Introduction
- To do a function check before you use the product
- To connect the battery charger
- Backpack battery (530iBX)
- To charge the battery
- To connect the battery to the product
- To connect the backpack battery to the product
- To start the product
- To start the product
- To stop the product
- To stop product and the backpack battery
- To set the optimal airflow for your work
- To temporarily increase the airflow
- Maintenance
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- Accessories
- EC Declaration of Conformity
436LiB 536LiB 530iBX
Vibration levels
5
Vibrations levels at handles, measured ac-
cording to ISO 22867, m/s
2
0.7 0.5 0.4
Fan performance
Air flow in normal mode with standard noz-
zle, m
3
/min
11.0 11.6 12.1
Maximum air velocity in normal mode with
standard nozzle, m/s / mph
47 / 105.1 48 / 107.4 49 / 109.6
Noise and vibration data are determined on the basis of
the rated maximum speed.
Approved batteries
Only use original Husqvarna BLi batteries for this
product.
Approved battery chargers
Battery charger QC330 QC500
Input voltage, V 100-240 100-240
Frequency, Hz 50-60 50-60
Power, W 330 500
Accessories
Approved accessories
Approved accessories
Type Art. no.
Nozzle (lenght)
Flat Nozzle 600 mm) 579 79 75-01
Round Nozzle with metal ring
(300 mm)
586 10 63-01
Round Nozzle with metal ring
(400 mm)
586 10 63-02
Nozzle Silencer (400 mm) 589 81 17-01
Handlebar Handlebar for 530iBX 501 71 51-01
Battery belt FLEXI
Carrying Kit for BLi batteries 590 77 67-01
Adapter Kit for 436LiB and
536LiB
590 77 67-02
Connector Kit for 530iBX
6
590 77 67-03
5
Reported data for vibration level has a typical statistical dispersion (standard deviation) of 2 m/s
2
.
6
436LiB and 536LiB requires the backpack BLiX-adapter
519 - 002 - 30.05.2018 15